Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Keep it free of loose vegetation, mud, etc. ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times. ALWAYS keep the handles clean. ALWAYS disconnect the spark plug wire before performing any maintenance work. ALWAYS, if a saw blade should bind fast in a cut, shut off the engine immediately. Push the branch or tree to ease the bind and free the blade. Wear hearing protection devices and a broad-brimmed hat or Wear close-fitting clothing to pro- helmet. tect legs and arms. Gloves offer added protection and are strongly Always wear eye protection such as recommended. Do not wear goggles or safety glasses. clothing or jewelry that could get caught in machinery or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts! Always operate with both hands firmly gripping the unit. Always make sure the appropriate cutting attachment shield is correctly installed and in good condition. Keep away from the rotating trimmer line or blade at all times, and never lift a moving attachment Keep a proper footing above waist-high. and do not overreach— maintain your balance at all times during operation. Wear appropriate footwear (non-skid boots or shoes): do not wear open-toed shoes or sandals. Never operate the unit while barefoot! Always wear a shoulder strap or a harness when operating a unit equipped with a blade. Figure 1 Be Aware of the Working Environment Avoid long-term Make sure bystanders or observers outside the 50-foot “danger zone” wear eye protection. very cold weather. 50 FEET When operating in rocky terrain or near electric wires or fences, use extreme caution to avoid contacting such items with the cutting attachment. Be extremely careful of slippery terrain, especially during rainy weather. If contact is made with a hard object, stop the engine and inspect the cutting attachment for damage. Figure 2 operation in very hot or Always make sure the appropriate cutting attachment shield is correctly installed. Reduce the risk of bystanders being struck by flying debris. Make sure no one is within 50 feet (15 meters)—that’s about 16 paces—of an operating attachment. Be constantly alert for objects and debris that could be thrown either from the rotating cutting attachment or bounced from a hard surface. Safety Labels IMPORTANT! Safety and Operation Information Labels: Make sure all informa- tion labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are avail- able from your local authorized Shindaiwa dealer. C3410 Figure 3 Product Description Brushcutter Blade Cutting Attachment Shield Gear Case Throttle Trigger Using the accompanying illustrations as a guide, familiarize yourself with this unit and its various components. See Figure 4. Understanding your unit helps ensure top performance, long service life, and safer operation. Figure 4 WARNING! Do not make unauthorized modifica- tions or alterations to any of these units or their components. C3410 BRUSHCUTTER Outer Tube Handle Bar Ignition Switch Fuel Tank Muffler Spark Plug Hanger Throttle Interlock Specifications C3410 C3410 dry weight (less attachments)............. ......................................14.1 lb./6.4 kg Engine model.....................................................................SF3410E Engine type................................ with Power Boost Chamber Bore x stroke...........................................1.5 x 1.2 in./38 x30 mm Displacement.......................................................2.1 cu. in./ 34 cc Maximum power ............... .....................................1.4 HP/1.0 kW @ 8,000 RPM (min-1) Fuel/oil ratio...................... .....50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil* Carburetor type............................Walbro WYL, diaphragm-type Fuel tank capacity ............. ....................................23.7 oz./700 ml Ignition ............................... ..........................One-piece electronic, program-controlled Spark plug................................................................NGK CMR5H Air cleaner type ......................................Non-reversible heavy-duty filter element Starting method .......................................................................Recoil Stopping method............................................................Slide switch Transmission type.............................Automatic, centrifugal clutch w/bevel gear EPA Emission Compliance Period**.......................................................Category A ** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended). * meets or exceeds these specifications and is recommended for all Shindaiwa products. Specifications are subject to ...
Эта инструкция также подходит к моделям:Садовые инструменты - 81188 (2.79 mb)
Садовые инструменты - 81188 (2.79 mb)
Садовые инструменты - 81188 (2.79 mb)
Садовые инструменты - 81188 (2.79 mb)