Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
It is convenient in many cases to work in 300 foot sections. Move the first Danger sign to the beginning of the freshly cleared area, place it, then take the first cutting area flag up to the end of the freshly cleared area 300 feet away. Walk and inspect the next 300 feet and place the second cutting area flag. Pick up the second DANGER sign, and take it a further 300 feet along the road or trail. Note that in many cases the DANGER area will extend in front of and behind the machine as well as along each side. Post signs accordingly. 5. The operator's cab must be protected by a strong wire screen or materials capable of withstanding an object thrown by the Grizzly. 6. Should a vehicle or pedestrian enter the defined DANGER area, immediately stop cutting until the area is clear again. 7. Objects tend to be thrown out from under the shroud in the direction of rotation and towards the raised edge of the shroud. Avoid cutting with the head titled at such an angle that objects would be thrown towards the operator's cab. See figure 1.5 Titling The Cutter Head. GRIZZLY 66 01/05 Safety Section 1-10 © 2005 Alamo Group Inc. SAFETY Reversing the direction of rotation of the cutting head on side opening machines increases the chances of objects being thrown out because of the position of the "gate" in relation to the boom arm. When clearing brush and small trees, start at the top and then lower the head down through the brush while sweeping from right to left. This avoids clogging the head with mulched material. NOTE: Keep the cutting head titled away from the operator when it is raised to avoid throwing splinters towards the cab. WARNING! Engage the cutting head with the tractor engine at idle. If the cutter is engaged at high rpm, severe damage to the coupling could occur. Always disengage the Grizzly before leaving the machine. Place the Control Valve in the OFF position and disengage the power take-off. Shut off the engine. A preventor or locking device must be installed on the control valve handle to prevent inadvertent or accidental engagement when the operator is out of the cab. GRIZZLY 66 01/05 Safety Section 1-11 © 2005 Alamo Group Inc. SAFETY ATTENTION! This unit was shipped with an Operator’s Manual Specifically designed to remain with the unit at all times. This manual is to be stored in the protective canister shipped with this unit. Because it is not feasible to attach the protective canister to the unit directly due to severe conditions in which it operates, the canister must be installed in a secure area such as the operator’s station. Choose a location that allows convenient access by the operator and easily allows removal of the Operators Manual. Use the adhesive and/or the included fasteners to securely attach the canister. Operator must read the Operator’s Manual prior to using the unit. GRIZZLY 66 01/05 Safety Section 1-12 © 2005 Alamo Group Inc. SAFETY 2 Clean Surface With Alcohol Before Applying Tape. Cover Holes With Tape to Prevent Moisture From Entering Canister. 1 3 8 4 5 6 7 ITEM PART NO. QTY DESCRIPTION 1 02977385 1 Sq. Canister 2 02968143 2 1/2' Tape 3M Back to Back 3 02977417 1 Decal, Op. Man. Inside 4 10058000 4 Bolt 5 00024100 4 Flatwasher 6 02967444C 4 Oper. Man. (Inside) 7 00017000 4 Lockwasher 8 02959924 4 Nut Toplock GRIZZLY 66 01/05 Safety Section 1-13 © 2005 Alamo Group Inc. SAFETY DECAL LOCATION ITEM PART NO. QTY LEVEL DESCRIPTION 1 00769736 1 WARNING Use/Repair Shield & Guards 2 00769737 2 DANGER Cutting Blades/Thrown Objects 3 02925100 1 IMPORTANT Genuine Parts 4 02967827 1 DANGER Multi-Hazard 5 02967867 2 DANGER Safety Gate Operation 6 02972284 2 LOGO Grizzly 7 02965262 1 WARNING Hose Burst 8 02973050 3 DANGER Danger Stand Clear 9 02973051 1 INSTRUCT Read Operators Instructions 10 02973052 1 DANGER Keep Clear Over Head Wires 11 00725746 1 PELIGRO Peligro Spanish Translation GRIZZLY 66 01/05 Safety Section 1-14 © 2005 Alamo Group Inc. SAFETY 1 - 00769736 7 - 02965262 5 - 02967867 Decals Not Shown 10 - 02973052 - Danger Keep Clear Wires 9 - 02973051 - Read Operator Instructions 8 - 02973050 - Danger Stand Clear 2 - 00769737 6 - 02972284 GRIZZLY 66 01/05 Safety Section 1-15 © 2005 Alamo Group Inc. SAFETY 4 - 02967827 3 - 02925100 GRIZZLY 66 01/05 Safety Section 1-16 © 2005 Alamo Group Inc. SAFETY 11 - 00725746 GRIZZLY 66 01/05 Safety Section 1-17 © 2005 Alamo Group Inc. SAFETY FEDERAL LAWS AND REGULATIONS This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such. Employer-Employee Operator Regulations U.S. Public Law 91-596 (The Williams-Steiger Occupational and Health Act of 1970) OSHA This Act Seeks: “...to assure so far as possible every working man and woman in the nation safe and healthful working conditions and to preserve our human resources...” DUTIES Sec. 5 (a) Each em...