n Apply downward pressure toward the rear handle as you reach the end of the planed cut. This helps keep the rear section of the planer base in contact with the work and prevents the front of the planer from gouging the cut. WARNING: Be careful to avoid hitting nails or any other foreign objects during planing operation; this action could nick, crack, or damage blades. NOTE: We suggest that you always keep an extra set of blades on hand. As soon as the blades in your planer show signs of becomin

ATTACHING THE PLANER TO A VACUUM See Figure 3. The chip collection system of the hand planer has a 1-1/4 in. port for inserting a vacuum hose. . Remove the dust bag. . Attach a vacuum hose to the chip exhaust. . Connect the vacuum to a power supply. WARNING: When the tool is not connected to a vacuum, always reinstall the dust bag back onto the tool. Failure to do so could cause dust or foreign objects to be thrown into your face or eyes, which could result in possible serious injury. 11 WARNING

. . SAVE THIS MANUAL FOR WARNING: To reduce the risk of injury, the user must read and FUTURE REFERENCE understand the operator’s manual before using this product. Part No. SP6442 Table of Contents Section Page Table of Contents .........................................................2 Safety Instructions For Jointer/Planer ..........................2 Safety Symbols ..........................................................2 Major Hazards .....................................................

The cutter head removes material from the work- piece Depth of cut A term used to indicate how deep into the workpiece the cutter knives will cut. Fence The fence is attached to the jointer/planer base. The fence helps support and guide the workpiece as it is pushed across the cutter head. Freehand Using the tool without holding the workpiece firmly against the fence and table. This can let the workpiece twist and kick back and must never be attempted. Gum A sticky, sap based residue from wood p

THICKNESS PLANER R4330 Your new planer has been engineered and manufactured to our high standards for dependability, ease of operation, and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance. WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a RIDGID® product. SAVE THIS MANUAL FOR FUTURE REFERENCE table of contents . Introduction..........................

WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Thank you for buying a Ridgid product. OPERATOR'S MANUAL 13 in. THICKNESS PLANER TP1300LS SAVE THIS MANUAL FOR FUTURE REFERENCE 1 Repeat Cut A- - 1 1 1 1 1 3 3 2 2 " " 4 4 4 4 8 1 1 1 3 1/8 3/32 1/16 1/32 0 2.5 2 1.5 1 .5 0 Ind I Cut 6 5 4 2 1 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 TABLE OF CONTENTS • Introduction ...........................................................

SP6393 PrintedinTaiwan RepairParts Parts List for 13" Thickness Planer Model No. TP13001 RIDGID parts are available on-line at Figure 1 Always order by Part Number -Not by Key Number * Standard Hardware Item -May be purchased locally. † These replacement parts are available where you purchased your Planer. 1 2 3 6 7 8 910 11 12 13 14 15 16 17 18 19 20 5 4 11 21 15 23 Key No. Part No. Description 1 2 3 4 5 6 7 8 9 10 11 12 827808 820240-7 827689 827740 827890 827809 827811 827810 821065-3 826463-