INTERFACES MANUAL PART NUMBER: 400-0103-001 PRODUCT REVISION: 2 VA6822 SYSTEM INTERFACE WITH AUDIO & EQUALIZATION USER’S GUIDE INTERFACES TABLE OF CONTENTS Page PRECAUTIONS / SAFETY WARNINGS...............2 GENERAL..........................................................2 RACK MOUNT SAFETY GUIDELINES..............2 INSTALLATION .................................................2 CLEANING ........................................................2 FCC / CE NOTICE....................................

Command Format: [VERCnUi] Cn = card ID number (n = # from 1 to 19) 6 MULTI-TASKER Ui = Unit ID (i = # from 0 to 9) (refer to the MT100-100 user’s guide for explanation) Example: If one MT108-103 card is plugged in slot #2 of unit 3: Sending the command [VERC2U3], will yield the following feedback from the Multi-Tasker™ MT108-103 690-0127-007 MT108-103 = card type 690-0127-007 = software version 2. [C] This command receives the status of the card. Command Format: [CnUi] Cn = card id (n = from 1 t

DS801-111 General 400-0442-006 3 SPECIAL APPLICATION MECHANICAL DS801-111 Housing 0.036” Aluminum Front Panel 0.035” Steel Length 4.10 in (104 mm) Width 1.38 in (35 mm) Height 1.20 in (30 mm) Weight 0.25 lb (0.11 kg) T° Operating 10°C-50°C T° Maximum 75°C Humidity 90% non-condensing MTBF (calc.) 38,000 hrs ELECTRICAL DS801-111 Input Video+ Stereo Audio Video/Sync/Audio Signals ALTINEX Standard Output Video Analog Signal 1.0 Vp-p max. Video Sync Level TTL Audio Level 0 dB +/-0.5 dB at 1 KHz Power

Determine the best location for the DA1957CT. There is an equalization adjustment on the DA1957CT that will affect all the distributed signals. Therefore, place the DA1957CT as equidistant to all receivers as possible. Step 2. Connect the power adapter to the DA1957CT and plug it into the power outlet. The power indicator LED on the front panel will light red. This indicates that the unit is operational. Step 3. Connect a cable from the Twisted Pair transmitter to the Input connector on the DA19

PATH OPERATION This command will set the path for the output, but it is not active until the switch command, [SW], is executed. Commands ending in "P" are not executed immediately. The path for outputs on multiple cards or the same card may be preloaded. Command Format: [OFFmCnP] m = Output no. (m = # from 1 to 4) Cn = Card ID (n = # from 1 to max slots) P = Path Example: There are two MT108-103 cards, C6 and C7. Disable Output 1 of C6 and Output 3 of C7 simultaneously using the following comman

These single ended signals allow the source to be distributed to large screen projectors or other displays with excellent quality at long distances. The DA1921SX is designed to be used together with a compatible CAT-5 computer video transmitter, such as model DA1920SX. The DA1921SX is connected to the transmitter using twisted pair CAT-5 UTP (Category 5, 5e, 6) type cable. The DA1921SX is compact and easy to use. It offers a CAT-5 input, two fully buffered outputs and equalization control. It is

Extremely rugged and compact, the DA1804NT fits easily into tight spots. Using high-quality 75 ohm coaxial cable, it can drive an NTSC signal 400 ft (122 m) or more. Specifications are subject to change. See for up-to-date information. FEATURES/DESCRIPTION DA1804NT GENERAL Inputs BNC female (1) Outputs BNC female (4) Compatibility NTSC, PAL, SECAM, High Resolution Monochrome Computer Video Table 1. DA1804NT General MECHANICAL DA1804NT Material Gray 0.1” Al Top Label Lexan Height (inches) 1.0 in

400-0435-005 2 SPECIAL APPLICATION ABOUT YOUR TP115-111 2 TECHNICAL SPECIFICATIONS 3 TP115-111 COMPUTER/COMPONENT TWISTED PAIR (TP) TO VIDEO + AUDIO RECEIVER The TP115-111 receives computer video and audio signals over Twisted Pair-type (CAT-5) cable when used together with an ALTINEX Twisted Pair transmitter, such as the TP115-110. As with the TP115-110, the TP115-111 is streamlined and lightweight for applications that have small space requirements. The unit offers video equalization for up to

16. [CLR] This command clears the members for a single group or for all nine groups. Command Format: [CLRGkUi] k = group number (k = # from 1-9) i = unit number (i = # from 0-9) Example: To clear group #1, send the [CLRG1U1] command. This command clears the members for the specified group only. 13 MULTI-TASKER To clear all groups of unit 1, send the [CLR GU1] command. 17. [GkUi] This command is used to request group data. With the command, the user can identify which input or output of a particu

Send the command [?] and receive the following feedback: [(MT101-102U0)(MT113-100C04)] MT101-102U1 = Panel Number and Unit ID MT113-100C04 = An MT113-100 is in slot 4. 5. [?C] This command will return general information about the card and its status. It is a function of both the card and the front panel and is only available with MultiTasker Front Panel systems that have the following firmware: 400-0209-002 10 MULTITASKER™ 690-0122-015 = Version 015 or later. 690-0123-004 = Version 004 or later