REFER SERVICING To prevent fire or shock hazard, do not expose this TO QUALIFIED SERVICE PERSONNEL. TV to rain or moisture. This symbol indicates “dangerous voltage” inside the product that presents a risk of electric shock or personal injury. This symbol indicates important instructions accompanying the product. To prevent electric shock, match wide blade of plug to wide slot, fully insert. Pour eviter les chocs electriques, introduire la lame la plus large de la fiche dans la borne corresponda

This manual describes the preparation required before using the converter box, how to connect the converter box to the monitor, how to adjust the monitor, and what to do if a problem occurs. Trademarks DVI is a trademark of the Digital Display Working Group (DDWG). EDID is a trademark of the Video Electronics Standard Association (VESA). ATI, FireGL, and RADEON are trademarks or registered trademarks of ATI Tec hnologies Inc. TMDS is a trademark of Silicon Image Incorporated. nVIDIA, Quadro, FX-

15 5 P/N: 55P5776 P/N: 07N2229 P/N: 55P5776 P/N: 07N2229 Fig. 3 Converter signal cable (length 65cm approx.) Fig. 4 User’s guide (this book) P/N: 55P5729 Fig. 5 Dual Link signal cable (length 200cm approx.) Important: Do not use other cables for T221 and the converter box. Do not use these cables for other equipment than the T221 monitor and converter box. 2. Connecting the Converter Box See your monitor manual for instructions and precautions on handling the monitor. Important: Use a large desk

Determine the best location for the DA1957CT. There is an equalization adjustment on the DA1957CT that will affect all the distributed signals. Therefore, place the DA1957CT as equidistant to all receivers as possible. Step 2. Connect the power adapter to the DA1957CT and plug it into the power outlet. The power indicator LED on the front panel will light red. This indicates that the unit is operational. Step 3. Connect a cable from the Twisted Pair transmitter to the Input connector on the DA19

Input signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 Switch 1 (Grounded when switch is ON 5 Green 6 Ground 7 Switch 2 (Grounded when switch is ON 8 No connection 9 Blue 10 Switch 3 (Grounded when switch is ON 11 Ground 4 DISTRIBUTION AMPLIFIERS PIN No. Input signals on 15-pin D female connector 12 Vertical Sync 13 Ground 14 Ground 15 Horizontal Sync Table 4. The DA1406WM Input pin-out PIN No. Output signals on 15-pin D female connector 1 Ground 2 Red 3 Composite Sync 4 No

The main number for the NSAC is 800-628-2888. Paging systems integrated with large switches such as the DEFINITY G3 are supported by the Technical Service Center (TSC). The main number for the TSC is 800-242-21 21 . Domestic and International Approvals UL and CSA Listed. Page 2 of 8 Contents Page INTRODUCTION..........................................................................................................................4 PACKAGE CONTENTS............................................

4 Connecting on Mono configuration ....................................... 6 Technical specifications ........................................................ 8 Safety information ................................................................ 9 Your warranty ...................................................................... 11 User and Installation Guide Unpacking: Check that this package contains: -one digital audio amplifier -Model 100 -one large AC adapter (wallwart) Thank you for purch

Avant de commencer ......................................................................... 1 2. Installation du materiel ...................................................................... 2 Spefications .............................................................................................. 4 Ordering Information................................................................................... 5 Troubleshooting ........................................................................

6 Limited Warranty TRENDnet warrants its products against defects in material and workmanship, under normal use and service, for the following lengths of time from the date of purchase. Fiber Converters - 5 Year Warranty If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become

Or CATV Typical application diagram. 1001ST This unit allows any stereo Audio/Video source, to distribute Audio and Video to different locations over standard coax cable. The RF output can be changed to any channel between 14 to 69 or cable channels from 65 to 125 ( 95-99 not included). VIDEO Nominal Input level: Input Impedance: Isolation port to port: Isolation out to input: Video bandwidth: AUDIO Nominal Input level: Input impedance: THD: Frequency Response: Channel Separation: Signal