Оценок - 2, средний балл: 4.5
(
)
)
|
Фрагмент инструкции
However, if you select “SW RE-MIX ON” when subwoofer is selected, you will be able to hear sound from the subwoofer. When in STEREO mode, the sound goes directly to front speaker. 5 Press the M MMMMM key or Joystick (3) to accept the setting. • The center speaker setting indication “CNTR” appears. 6 Use the MULTI CONTROL knob or Joystick (5/.) to select the appropriate center speaker setting. If you selected “LARGE” as the front speakers setting, 1 CNTR LARGE : A large center speaker is connected to the receiver. 2 CNTR NML/THX : An average size center speaker is connected to the receiver. 3 CNTR OFF : Center speaker setting mode to the receiver is OFF. If you selected “NML/THX” as the front speakers setting, 1 CNTR NML/THX : Center speaker setting mode to the receiver is ON. 2 CNTR OFF : Center speaker setting mode to the receiver is OFF. 7 Press the M MMMMM key or Joystick (3) again to accept the setting. • The surround speaker setting indication “SURR” appears. Continued to next page. 23 EN Preparing for surround sound 8 Use the MULTI CONTROL knob or Joystick (5/.) to select the appropriate surround speaker setting. If you selected “LARGE” as the center speaker setting, 1 SURR LARGE : Large surround speakers are connected to the receiver. 2 SURR NML/THX : Average size surround speakers are connected to the receiver. 3 SURR OFF : Surround speaker setting mode to the receiver is OFF. If you selected other than “LARGE” as the center speaker setting, 1 SURR NML/THX : Surround speaker setting mode to the receiver is ON. 2 SURR OFF : Surround speaker setting mode to the receiver is OFF. • When the setting “SURR OFF” is selected, the procedure skips to step #. 9 Press the M MMMMM key or Joystick (3) again to accept the setting. • The surround speaker setting indication “SB” appears. 0 Use the MULTI CONTROL knob or Joystick (5/.) to select appropriate surround back speaker setting. If you selected “LARGE” as the surround speaker setting, 1 SB NML/THX : Average size surround back speaker is connected to the receiver. 2 SB LARGE : Large surround back speaker is connected to the receiver. 3 SB OFF : Surround back speaker setting mode to the receiver is OFF. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE If you selected other than “LARGE” as the surround speaker setting, 1 SB NML/THX : Surround back speaker setting mode to the receiver is ON. 2 SB OFF : Surround back speaker setting mode to the receiver is OFF. • After setting SB (surround back) from OFF to NML/THX, 6ch AMP setup display will appear to enable you to re-select either SW, SB or OFF from the surround back or subwoofer speaker terminal. ! Press the M MMMMM key or Joystick (3) again to accept the setting and “SURR:MIX” appears. • Surr:mix is when the SL and SR speakers signals are mixed to produce sound from the surround back speaker which would enable the listener to enjoy sound coming from the back. L SL S SB SR C R SP MUTE OPTICAL 6CH INPUT COAXIAL ANALOG 96kHzfs CINEMA EQ. ACTIVE EQ. DSP MODE DTS. MATRIX DISCRETE DOLBY DIGITAL PRO LOGIC STEREO LOUDNESS NEO:6 CSIIA B CLIP AUTO DETECT THX AUTO RDS RTY MEMO STEREO TUNED Surround EX SW LFE @ Use the MULTI CONTROL knob or Joystick (5/.) to select the following. 1 SURR:MIX ON : Surround mix setting mode to the receiver is ON. 2 SURR:MIX OFF : Surround mix setting mode to the receiver is OFF. • If surround back speaker is turned OFF, SURR:MIX setting is not visible and the procedure skips to step #. 24EN # Press the M MMMMM key or Joystick (3) again to accept the setting. • The subwoofer re-mix setting indication “SW RE-MIX” appears. $ Use the MULTI CONTROL knob or Joystick (5/.) to select the appropriate subwoofer re-mix setting. 1 SW RE-MIX ON : Subwoofer re-mix setting mode to the receiver is ON. 2 SW RE-MIX OFF : Subwoofer re-mix setting mode to the receiver is OFF. • If subwoofer is turned OFF, subwoofer re-mix setting is not visible. % Press the SETUP key again to return to the main setup displays. • The receiver enters the speaker volume level adjustment mode. • In steps 4 and 5, indications appear only for the selected channels of the speakers that require adjusting. 4Adjust the speaker volume level. From your usual listening position, adjust the volume levels. The volume levels from each speaker should be the same. 1 Press the M MMMMM/? ????? keys or Joystick (2/3) to select TEST TONE. 2 Press the SETUP key for the following displays: 1 T.TONE AUTO 2 T.TONE MANUAL 3 The selection of AUTO/MANUAL TEST TONE is done by the MULTI CONTROL knob or Joystick (5/.). Press the SETUP key again to begin TEST TONE. Use the MULTI CONTROL knob or Joystick (5/.) to adjust the volume level of the test tone output from the speaker channel to be adjusted. For AUTO selection, the first test tone is heard from the front left sp...
Эта инструкция также подходит к моделям:Ресиверы и усилители - KRF-X9060D (1.85 mb)