Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
The remote control is designed to retain setup codes in memory while you change batteries. Registering setup codes for other components SOURCE REMOTE MODE Numeric keys INPUT SELECTOR 1 Find the setup code of the component to be registered. • Refer to the setup code lists to find the setup code for the component to be registered. er Example: To register a DVD made by KENWOOD, you would enter “805”. Input (DVD) Component Maker DVD player KENWOOD Code 805, 808 Key DVD 2Registering components for REMOTE MODE [(DVD, CBL, DSS/SAT, VCR, TV, OTHERS - RC-R0813/R0814) or (DVD, CD, CBL/SAT, VCR, TV, OTHERS - RC-R0815)] keys. 1 For DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV keys; Hold down the SOURCE key and press the numeric keys to enter the setup code. • Example: Press “805” to register a DVD player manufactured by KENWOOD. • If you push an invalid key, the remote control will display “ERROR” and exit the setup mode. 2 The OTHERS key enables you to operate another DVD, CD, CBL, DSS/SAT, CBL/SAT, VCR or TV component. For OTHERS key; Hold down the OTHERS key and press the numeric keys to enter the setup code. • Example: After you have registered the KENWOOD DVD player, press“804” to register another DVD player which is manufactured by Panasonic. • If you push an invalid key, the remote control will display “ERROR” and exit the setup mode. 3Press any of the REMOTE MODE key and then press the SOURCE key to check that the component you want to control turns on. If the component does not react, and there is more than one setup code, enter another setup code and try again. • If the component is already on, pressing the SOURCE key will turn it off. 4Repeat steps 2 to 3 to register additional components until all components have been registered. Alternative REMOTE MODE key . This operation is optional and is convenient when you link an INPUT SELECTOR key to the REMOTE MODE key. While operating one component, the INPUT SELECTOR key functions as an alternative REMOTE MODE key to select another component. • Example: REMOTE MODE (DVD) key can be linked to the INPUT SELECTOR (VIDEO 1) key as described below; 1 After registering the setup code, press and hold the SOURCE key and then press the REMOTE MODE (DVD) key. 2 While holding down the SOURCE , press the INPUT SELECTOR (VIDEO 1) key. • Now the VIDEO 1 key will function as a DVD key which can be selected at the same time while operating a CD player. • Repeat step 1 to 2 to link other INPUT SELECTOR keys. Note Although each setup code is designed to work with a number of different models, certain codes may not work with some models. (Also, certain codes may only operate some of the functions available on a given model.) 41 EN Basic remote control operations for other components Basic remote control operations for other components This operation lets you operate the registered components. KENWOOD audio components with system control turn on and off automatically with the receiver via the system control connections. SOURCE RECEIVER INPUT SELECTOR 1Use the INPUT SELECTOR keys to select the component you desire. • Pressing the INPUT SELECTOR keys also changes the input selector on the receiver. • When you operate your registered DVD player, CD player, Cable tuner, DSS/SAT receiver, VCR or TV, go to step 2. • When you operate the CD player, Cassette deck, MD player, or Tuner with system control connection, go to step 3. 2Press the SOURCE key. • To return to the receiver operation mode, press the RECEIVER key. 3Press the operation keys you desire. y The remote control mode remains at the selected input. If you wish to operate another component, repeat step 2 or 3. Note Be sure to point the remote control at the remote sensor on the receiver when you want to operate KENWOOD components connected by system control cords. Otherwise, point the remote control at the component you want to operate. Storing the remote control code of the other components The remote control unit can store the remote control code of the other components and you can operate the other components from the remote control unit. The remote control code is stored on the key or memory of the remote control unit. Storing on the key You can store the remote control code to the key as shown below: LEARN key SOURCE Numeric keys CH + / – Skip ./4TOP MENU MENU OSD Cursor 5/./2/3 PAGE fi/% ENTER RETURN 3/8 (Play/Pause) 1 Rewind 2 Flip . Fast forward 8 Pause DISC SEL 7 StopDISC SKIP P.CALL 4/DOWN P.CALL /UP . TUNING + TOP MENU SET UP MENU SOUND TV CONTROL VOL. VOLUME + --INPUT SEL + - CH DVD VCR CBL TV DSS/SAT OTHERS RECEIVER SOURCE POWER ACTIVE EQ DISC SEL DISC SKIP FLIP BAND INPUT SEL A/B AUTO 8DVD/6CH CD/DVD PHONO TUNER VIDEO 1 VIDEO 2 MD/TAPE MUTE DVD ENTER INPUT SELECTOR MULTI CONTROL . 41.267DIMMER ™. ™ 1 4 7 +10 2 5 8 0 3 6 9 +100 REMOTE MODE LISTEN MODE DSP MODESTEREOINPUT MODE SPEAKER EQ ™ VIDEO 3 E LEARN THX 42EN 1 Point the infrared ray system part of another remote control unit to the remote sensor of the remote cont...
Эта инструкция также подходит к моделям:Ресиверы и усилители - VR-6070 (1.85 mb)