Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
We at KENWOOD are confident you years of rich listening pleasure. this booklet carefully. It will help you to obtain the peak your power amplifier can deliver. Features Lucasfilm THX ® Ultra Certification THX ® Ultra certification means that the MX-5000 meets most stringent performance standards. This ensures quality and compatibility with other THX ® -certified products. Operation Modes The MX-5000 can be used in one of three different operation 2-channel stereo, 2-channel mono, or Mono (bridged, or BTL), so fit into almost any system configuration and deliver all the power your speakers need. 12 V Relay Power Control The MX-5000 can be powered on and off by an external 12 volt trigger signal, so it can be installed in a remote location. Lucasfilm and THX are registered trademarks of Lucasfilm Ltd. Before applying Caution: Read this page carefully to ensure Units are designed for operation U.S.A. and Canada ................... AC 120 V only Safety precautions Caution: Read this page carefully to ensure safe operation. WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK, RAIN OR MOISTURE. Contents THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPOR- TANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFI- CIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SER-VICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Before applying power............................................ 2 Safety precautions.................................................. 2 Unpacking ...................................................................... 2 Installation ...................................................................... 3 Notes on heat generation ......................................... 3 Connections .................................................................... 3 Connections of speaker cords ................................... 3 2-Channel stereo configuration.................................. 4 Mono (bridged, or BTL) configuration ........................ 5 2-Channel mono configuration................................... 6 Controls and indicators ................................................ 7 In case of difficulty ......................................................... 7 12 V Relay power control ......................................... 7 Operation to reset .................................................... 7 Troubleshooting ......................................................... 7 Specifications ................................................ Back cover Unpacking Unpack the unit carefully and make sure that all accessories without delay. Only the consignee (the person or company receivare put aside so they will not be lost. ing the unit) can file a claim against the carrier for shipping damage. Examine the unit for any possibility of shipping damage. If your unit We recommend that you retain the original carton and packing ma- is damaged or fails to operate, notify your dealer immediately. If terials for use should you transport or ship the unit in the future. your unit was shipped to you directly, notify the shipping company Accessories Audio cord (1) Stereo mini-plug cord (1) Speaker terminal cover (1) 2 2 EN Installation 7 Notes on heat generation • This unit incorporates a ventilation starts to rotate automatically when setting which may prevent ventilation * Leave clearance of more than 10 cm (4 in.) more than 10 cm (4 in.) in front and rear of the tightly when it is mounted on a rack. • The ventilation fan of this unit has been designed piece of paper is attracted by the air intake, the internal temperature will rise and protection circuitry will be activated. In this case, the sound will not More than 50 cm (20 in. ) More than More than 10 cm (4 in.) Standby mode While the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit. More than 10 cm (4 in.) 10 cm (4 in.) More than 10 cm (4 in.) Connections Make connection as shown When connecting the related the instruction manuals of the are completed. 7 Connections of speaker cords Connection of banana plugs (Except for some countries, like Singapore, etc.) 1 Secure. 2 Insert. Connections of speaker cords 1 Strip coating. 2 Loosen. 3 Insert. 4 Secure. • Sound will not be heard if the speaker terminal is not fully secured. CAUTION: If the unit is used in the U.S.A. or Canada, please read the supplement to the operating instruction entitled “Con...