Оценок - 3, средний балл: 3
(
)
)
|
К этому устройству также есть другие инструкции:
Ресиверы и усилители - KRF-V7090D (2.45 mb)
Ресиверы и усилители - KRF-V7090D (2.46 mb)
Фрагмент инструкции
In this case, select one of the LISTEN modes which are for 6.1 or 7.1 channel surround mode. 30 EN Ambience effects When the Dolby Digital or Dolby Digital EX signal is input : 1 DOLBY DIGITAL : Dolby Digital surround. 2 DOLBY D EX : Dolby Digital EX surround. 3 YD+PLII x MOVIE : Dolby Digital+Pro Logic II x surround MOVIE mode. 4 YD+PLII x MUSIC : Dolby Digital+Pro Logic II x surround MUSIC mode. 5 PLII x MOVIE : Dolby Pro Logic II x surround MOVIE mode.* 6 PLII x MUSIC : Dolby Pro Logic II x surround MUSIC mode.* 7 PLII x GAME : Dolby Pro Logic II x surround GAME mode.* 8 PLII MOVIE : Pro Logic II surround MOVIE mode.* 9 PLII MUSIC : Pro Logic II surround MUSIC mode.* 0 PLII GAME : Pro Logic II surround GAME mode.* -PRO LOGIC : Pro Logic surround.* = STEREO : Normal stereo playback. (* This mode can be selected only when 2 channel stereo signal comes in.) When you select DOLBY DIGITAL “DOLBY DIGITAL” will be displayed. L SL SR C R SP AB LFE DIGITAL DOLBY DIGITALAUTO DETECT When the DTS or DTS-ES (matrix or discrete) signal is input : 1 DTS-ES Mtrx 6.1 : DTS-ES MATRIX 6.1 channel surround. 2 DTS-ES Dscrt 6.1 : DTS-ES DISCRETE 6.1 channel surround. 3 DTS : DTS 5.1 channel surround. 4 DTS+NEO:6 Cin : DTS+Neo:6 surround CINEMA mode. 5 NEO:6 CINEMA : Neo:6 surround CINEMA mode.* 6 NEO:6 MUSIC : Neo:6 surround MUSIC mode.* 7 DTS 96/24 : DTS 96/24 playback mode. 8 STEREO : Normal stereo playback. (* This mode can be selected only when 2 channel stereo signal comes in.) When the analog signal or the digital signal (except for Dolby Digital or DTS signal) is input : 1 PLII x MOVIE : Pro Logic II x surround MOVIE mode. 2 PLII x MUSIC : Pro Logic II x surround MUSIC mode. 3 PLII x GAME : Pro Logic II x surround GAME mode. 4 PLII MOVIE : Pro Logic II surround MOVIE mode. 5 PLII MUSIC : Pro Logic II surround MUSIC mode. 6 PLII GAME : Pro Logic II surround GAME mode. 7 PRO LOGIC : Pro Logic surround. 8 NEO:6 CINEMA : Neo:6 surround CINEMA mode. 9 NEO:6 MUSIC : Neo:6 surround MUSIC mode. 0 STEREO : Normal stereo playback. • Dolby Digital or DTS signal having more channels than the maximum number of playback channels available using the receiver’s current settings is input, downmixing is performed to match the number of available channels. 3 DSP mode. DSP can produce these effects without spoiling the sound quality of the original music or video source. This mode can be selected when digital signals other than Dolby Digital or DTS, or analog signal come in. 1 Pressing the DSP key or DSP MODE key will display the current DSP MODE status. 2 Each press of the key will switch to the next status as shown bellow: 1 ARENA : DSP surround ARENA mode. 2 JAZZ CLUB : DSP surround JAZZ CLUB mode. 3 THEATER : DSP surround THEATER mode. 4 STADIUM : DSP surround STADIUM mode. 5 DISCO : DSP surround DISCO mode. • The DSP mode selection is displayed for approximately 3 seconds. 4 Adjust the volume. Switching the LISTEN mode to STEREO temporarily Pressing the STEREO key changes the currently selected LISTEN mode into STEREO. It will be changed back to the original LISTEN mode by pressing the STEREO key again. • If the power is turned off and turned back on, or the input selector is switched to another and switched back, the LISTEN mode will be back to the original one. Notes • Depending on the type of the signal or speaker setting, some listening modes cannot be selected. • When playback is started, the sound may be cut or interrupted before the input source is confirmed as Dolby Digital. • To enjoy Dolby Digital surround (as well as all the other listening modes) from a single component, be sure to use a Dolby Digital compatible source component. 31 EN Ambience effects Convenient functions DVD 6-channel playback Adjusting the sound Using a DVD player or the like equipped with six (5.1) output channels and You can make further adjustments to the sound while listening to the receiver, you can enjoy surround sound playback. playback in the surround mode. Connecting a DVD player which can decode the surround signal itself is also acceptable. VOLUME INPUT MODE CONTROL DVD/6CH VOLUME%/fi DVD/6CH INPUT MODE Preparations • Connect your DVD player to the DVD/6CH jacks of the receiver. • Turn on all other components that will be used. • Complete “Preparing for surround sound”. & 1Use the DVD/6CH key to select “DVD/6CH” as the input source. 2Select "6CH INPUT" by pressing the INPUT MODE key. • If speaker system B is on when “6CH INPUT” is selected as the input mode, it switches off and speaker system A turns on automatically. 3Start playback of the DVD software. 4Adjust the volume. • It is not possible to adjust the volume level or sound quality (SETUP, SOUND, LISTEN MODE, ACTIVE EQ, STEREO, DSP MODE, LOUDNESS and TONE key will not be functional) of the channels separately when the receiver is in the 6CH INPUT mode. Adjust the volume with the controls of the DVD player. For the powered subwoofer, you can adjust the volume of the subwoofer using the ...