Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Ресиверы и усилители - KRF-V7090D (2.45 mb)
Ресиверы и усилители - KRF-V7090D (2.46 mb)
Фрагмент инструкции
When DIGITAL MANUAL mode is selected, the set listen modes may be changed automatically depending on the input signal. . Fixed to analog input: Select this setting to play analog signals from a VCR, etc. If the INPUT MODE key is pressed quickly, sound may not be produced. Press the INPUT MODE key again. 8 EN Setting up the system Connecting the terminals 1 Strip coating. 3 Insert. 2 Loosen. 4 Secure. 1 Strip coating. 3 Insert the cord. 2 Push the lever. 4 Return the lever. • Never short circuit the + and – speaker cords. • If the left and right speakers are connected inversely or the speaker cords are connected with reversed polarity, the sound will be unnatural with ambiguous acoustic imaging. Be sure to connect the speakers correctly. Speaker impedance After confirming the speaker impedance indications printed on the rear panel of this model, connect speakers with matching impedance ratings. Using speakers with a rated impedance other than that indicated on the rear panel of this model could result in malfunctions or damage to the speakers or this model. ENGLISH Speaker placement * For Surround Back Speaker, you may place either two Surround Back Speakers (Surround Back Left Speaker and Surround Back Right Speaker) for 7.1 channel surround sound system or one Surround Back Speaker for 6.1 channel surround sound system. Front (left and right) Speakers Place at the front left and right of the listening position. Front speakers are required for all surround modes. Center Speaker Place front and center. This speaker stabilizes the sound image and helps recreate sound motion. Required for surround playback. Surround (left and right) Speakers Place at the direct left and right, or slightly behind, the listening position at even heights, approximately 1 meter above the ears of the listeners. These speakers recreate sound motion and atmosphere. Subwoofer Usually, place the subwoofer in the front center position in the listening room, near one of the front speakers near the center speaker. (Since the subwoofer has less directivity than other speak- ers, it can be placed almost in any position that can offer the best low frequency reproduction according to the room layout.) Surround Back Speaker/s Place the surround back speaker behind the listening position, at the same height as the left and right surround speakers. • Although the ideal surround system consists of all the speakers listed above, if you don't have a center speaker or a subwoofer, you can divide those signals between the available speakers in the speaker settings steps to obtain the best possible surround reproduction from the speakers you have available. & *Surround Back Speaker Subwoofer Center Speaker Front Speakers (L, R) Surround Speakers (L, R) Listening position *Surround Back Left Speaker *Surround Back Right Speaker 9 EN ENGLISH Setting up the system Connecting a DVD player (6-channel input) If you have connected a DVD player to this model with digital connection, be sure to read the “Input mode settings” section carefully. 8 DVD/6CH INPUT FRONT SURROUND SUB WOOFER CENTER PLAY INPLAY IN VIDEO 2 VIDEO 3 S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO VIDEO OUT S VIDEO OUT OUT VIDEO IN VIDEO IN VIDEO IN VIDEO IN VIDEO VIDEO OUT COAXIAL OPTICAL OPTICAL VIDEO 3CD/DVD DIGITAL IN DVD/ 6CH VIDEO 2 MONITORDVD FRONT OUT L/R S VIDEO OUT COAXIAL DIGITAL OUT (AUDIO) DVD Player SURROUND OUT L/R VIDEO OUT CENTER OUT SUBWOOFER OUT For COMPONENT VIDEO connection $ DVD MONITOR S VIDEO cord 10 EN Setting up the system Connecting audio components To AC wall outlet • The earth terminal with the H symbol is used for noise reduction of record player. It is not for safety earth. IN IN REC OUT PLAY IN CD/DVD MD/TAPEPHONO RLR L Cassette Deck or MD Recorder DVD Player or CD Player IN OUT Moving coil (MC) cartridge record player cannot be used directly from this model unit. It can only be used when another equalizer amplifier is connected. OUT OUT Record Player ENGLISH CAUTION Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard. • Do not place any object impairing heat radiation onto the top of the unit. • Leave a space around the unit (from the largest outside dimension including projection) equal or greater than, shown below. Top panel : 50 cm Side panel : 10 cm Back panel : 10 cm 11 EN Setting up the system Connecting video components ENGLISH OUT VIDEO IN VIDEO IN VIDEO IN VIDEO IN VIDEO VIDEO OUT VIDEO 1 VIDEO 2 VIDEO 3 PLAY INPLAY INPLAY INREC OUT S VIDEO OUT VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO IN VIDEO S VIDEO OUT MONITORDVD (DVD) (MONITOR) IN Video Recorder Monitor TV OUT S Video Jacks About the S VIDEO Jacks Use the S VIDEO Jacks to make connections to video components with S VIDEO IN/OUT Jacks. • If you use the S VIDEO jacks to connect your video playback components, be sure to use the S VIDEO jacks when connecting your monitor and video recording components. Video IN Video A...