Оценок - 4, средний балл: 4.8
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
. Input mode settings CD/DVD, VIDEO2, DVD (VR-806) and DVD/6CH(KRF-V5080D) inputs each include jacks for digital audio input and analog audio input. After completing connections and turning on this model, follow the steps below. 1Use the INPUT SELECTOR knob to select CD/DVD, VIDEO2, DVD (VR-806 only), DVD/6CH (KRF-V5080D only). 2Press the INPUT MODE key. Each press switches the setting as follows: In DTS play mode 1F-AUTO (digital input, analog input) 2D-MANUAL (digital input) In CD/DVD, VIDEO2, DVD(VR-806 only), DVD/6CH(KRF-V5080D only) play mode 1F-AUTO (digital input, analog input) 2D-MANUAL (digital input) 36CH INPT (DVD/6CH input) (KRF-V5080D only) 4ANALOG (analog input) Digital input: Select this setting to play digital signals from a DVD, CD, or LD player. Analog input: Select this setting to play analog signals from a cassette deck, VCR, or record player. Auto detect: In “F-AUTO” (full auto) mode (AUTO DETECT and DIGITAL indicators light up), this model detects the digital or analog input signals automatically. Priority is given to digital signal during input mode selection. This model will select the input mode and listening mode automatically during playback to match the type of input signal (Dolby Digital, PCM, DTS ) and the speaker setting. The initial factory setting is full auto. To keep this model set to the currently selected listening mode, use the INPUT MODE key to select “D-MANUAL” (digital manual). However, even when this setting is selected, there may be cases in which the listening mode is selected automatically to match a Dolby Digital source signal depending on the combination of listening mode and source digital. In D-MANUAL mode, if the audio reproduction stops in the middle due to change in the input signals etc, press the LISTEN MODE key. If the INPUT MODE key is pressed quickly, sound may not be produced. Press the INPUT MODE key again. INPUT MODE INPUT SELECTORLISTEN MODE 8 EN Setting up the system Setting up the system Shape of AC outlets AUX CD / DVD REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPE AUDIO IN OUTIN OUT OUT OUT Cassette deck or MD recorder CD or DVD player Video component ) Other component Australia Other countries To AC wall outlet 9 EN Setting up the system Setting up the system VIDEO 2 IN DVD IN MONITOR OUT VIDEO 1 OUT VIDEO 1 IN PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 VIDEO AUDIO Video deckIN Video output (Yellow RCA pin cords) OUT OUT Monitor TV Video input and output (Yellow RCA pin cords) Video IN IN Audio inputs and outputs Video OUT DVD player or LD player Audio OUT A video component with digital audio outputs should be connected to the VIDEO 2 jacks. 10 EN Setting up the system Setting up the system If you have connected this model to a video component with COMPONENT jacks, you can get a better picture quality than by connecting to the S-VIDEO jacks. PLAY IN VIDEO 2 REC OUT PLAY IN VIDEO 1 REC OUT PLAY IN MD / TAPECD/DVD AUDIO MONITOR Y CB CR Y CB CR DVD IN COMPONENT VIDEO VIDEO 2 IN DVD player or LD player Audio OUT Monitor TV Video OUT DVD player Audio OUT Video OUT When connecting the TV to the COMPONENT jacks, be sure to connect all the other components to the COMPONENT jacks. 11 EN Setting up the system Setting up the system The digital in jacks can accept DTS, Dolby Digital, or PCM signals. Connect components capable of outputting DTS, Dolby Digital, or standard PCM (CD) format digital signals. If you have connected any digital components to this model, be sure to read the “Input mode settings” section carefully. VIDEO 2 DVD/6CH* CD / DVD COAXIAL OPTICAL DIGITAL IN *VR-806: DVD Component with DTS, Dolby Digital, or PCM COAXIAL DIGITAL OUTCOAXIAL DIGITAL OUT (AUDIO) DOLBY DIGITAL RF OUT (AUDIO) PCM OUT RF digital demodulator (Commercially available) CD or DVD player OPTICAL DIGITAL OUT (AUDIO) Optical fiber cable COAXIAL DIGITAL OUT (AUDIO) Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See “Connecting video components”.) 0 LD player To connect an LD player with a DIGITAL RF OUT, connect the LD player to the RF digital demodulator (Commercially available). Next, connect the DIGITAL OUT jacks of the demodulator to the DIGITAL IN jacks of this model. Connect the video signal and analog audio signals to the VIDEO 2 jacks. (See “Connecting video components”.) 12 EN Setting up the system Setting up the system If you have connected a DVD player to this model with digital connection, be sure to read the “Input mode settings” section carefully. 8 DVD IN MONITOR OUTVIDEO 2 VIDEO 1 IN IN VIDEO 1 OUT CENTER SUB WOOFERSURROUNDFRONT VIDEO 2 DVD / 6CH CD/DVD COAXIAL OPTICALDVD/6CH INPUTVIDEO DIGITAL IN SURROUND OUT L/R VIDEO OUT (Yellow RCA pin cord) DVD player SUBWOOFER OUT CENTER OUT FRONT OUT L/R COAXIAL DIGITAL OUT (AUDIO) CAUTION Be sure to adhere to the following, or proper ventilation will be blocked causing damage or fire hazard. • Do not place any object impairing heat radiation onto the top of the unit. • Leave a space aroun...
Эта инструкция также подходит к моделям:Ресиверы и усилители - VR-806 (1.27 mb)