Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
15 4.13 POWER LED This LED indicates when the power is on in your AMX-140(FX). 16 4.14 PHANTOM LED This LED indicates when the phantom power is switched on. 17 4.15 TAPE Switches Engaging this button to route the 2 TRACK IN signal into the control room output. - 2TK TO CTRL ROOM Engaging this button to route the 2 TRACK IN signal into the main output. - 2TK TO MIX 18 19 14 15 16 17 18 19 21 20 4.16 2TK IN Control 20 This control is used to adjust the level of 2TK IN signal, which can be varied from to MAX. 4.17 PHONES/CTRL ROOM Control 21 This control sets the amount of signal sent to the control room and headphone. 4.18 AUX RETURN Controls 22 As implied in the name, the auxiliary returns are used to 'return' the signal from the external effects or processors to the main mix, but, most of the times, it can also be worked as the additional stereo line inputs. In this typical compact unit: 0 00 - 8 +15 - 8 +15 - 8 +15 AUX2/DFX AUX2/DFXAUX2/DFX TO AUX 1 11 TO AUXAUX AUXAUX RTN NN 1 11RTRT AUX RETURN1 is configured to be assigned to the main mix bus AUX AUXAUX RTN NN 2 22 (DFX) (DFX)(DFX) permanently, for mono application, only use the left input jack. But for AUX RETURN2, excluding assigning the returned signal to main mix bus, it can also to AUX1 bus, and in this case, adjust AUX2/ DFX TO AUX1 knob 23 to control the input level. In AMX-140FX model, AUX RETURN2 (DFX) is connected rightly with the output of the internal digital effects, but, this signal flow will be broken, if you have any external signal inserted from these two jacks. 4.19 AUX SENDS Connectors 24 These 1/4" sockets are used to send out the signal from the AUX bus to external devices such effects. 23 22 27 26 4.20 STEREO AUX RETURNS Connectors 25 Use these stereo 1/4" sockets to return the sound of an effect unit to the main mix. You can also use them as the extra auxiliary inputs. 4.21 PHONES 26 This socket will send out the mix signal to a pair of headphones. 2 RIGHT RIGHT LEFT(MONO)LEFT(MONO) LEFT(MONO)LEFT(MONO) 1 AUX SENDS 1 2 L R PHONES STEREO AUX RETURNS CTRL ROOM OUTPUT 25 24 4.22 CTRL ROOM OUTPUT Connectors 27 These 1/4" sockets are used to send the control room signal to the studio monitor speakers or a second set of PA. 12 13 DFX MUTE PRESETS 10 9 8 1 12 11 7 4 5 6 3 2 13 14 15 16 10 9 8 1 12 11 7 4 5 6 3 2 13 14 15 16 VARIATIONS PEAK 14. REV. + DELAY 16. REV. + CHORUS 15. REV. + FLANGER 5. LARGE ROOM 13. CHORUS 12. FLANGER 11. STEREO DELAY 10. MONO DELAY 9. SPRING REVERB 8. TAPE REVERB 7. PLATE 6. SMALL ROOM 4. SMALL HALL 3. LARGE HALL 2. VOCAL 2 1. VOCAL 1 4.23 24 BIT DIGITAL EFFECTS (For AMX-140FX Model) Adjust this knob to select the right effect you wish to perform. There are total 16 options for you: several kinds of reverb, mono and stereo delay, effects with modulation, and versatile two-effect combination. - PRESETS Control 28 This switch is used to activate/deactivate the effect facility. Sometimes, you can also use the DFX FOOTSWITCH for convenient operation. - MUTE Switch 30 This LED lights up when the input signal is too strong. In case of the digital effect module being muted, this LED also lights up. - PEAK LED 31 - VARIATIONS Control 29 Since you have selected the preferable effect, the next step, please go with the fine consideration, there are also total 16 variations for each preset. Each variation may be managed by several different factors. - DFX FOOTSWITCH 32 This 1/4" phone jack can be used to connect an external footswitch to turn on/off the onboard effect module. DSP FOOTSWITCH 28 29 30 31 32 TAPE IN TAPE OUT L R 2-TRACK IN/OUT 33 4.24 2TK IN/OUT Connectors - TAPE IN - TAPE OUT Use the tape input if you wish to listen to your mix from a taper recorder or DAT. You can assign the signal coming from the taper recorder either to a pair of studio monitor using the control room assignment on the front panel or you can also send the signal directly to the main mix. These RCA jacks will route the main mix into a tape recorder. 33 LEFT RIGHT MAIN MIX OUTPUT (BAL/UNBAL) 14 4.25 MAIN MIX OUTPUT Connectors 34 Through the main mix level control, you can adjust the output level from - to +15dB. 34 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: SHOCK HAZARD AVIS: RISQUE DE CHOC ELECTRIQUE - DO NOT OPEN - NE PAS OUVRIR SERIAL MODEL POWER ON OFF RATED POWER CONSUMPTION: 25W PHANTOM 18VAC~ 35 2 36 - POWER ON/OFF Switch This switch is used to turn the main power ON and OFF. - PHANTOM ON/OFF Switch This switch will apply +48 Volt Phantom Power only to the 5 XLR microphone inputs. Never connect microphones when the phantom power is on already. 4.26 REAR PANEL Description This connector is used to connect the supplied AC Adapter. - AC INPUT Connector 35 2 36 The stereo output is supplied both with XLR and 1/4" TRS sockets, which is used to send the audio signal to an amplifier. 5. INSTALLATION AND CONNECTION Ok, you have got to this point you are now in the position to successfully operate your AMX-140(FX). However, we advise...
Эта инструкция также подходит к моделям:Ресиверы и усилители - AMX-140 (2 mb)