Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
2009 - 2010 Hauppauge Computer Works, Inc. Telephone: 631-434-1600 91 Cabot Court Fax: 631-434-3198 Hauppauge, NY 11788 Tech Support: 631-434-3197 techsupport@hauppauge.com Sales: sales@hauppauge.com Web site: 1. Contents of the WinTV-HVR-1250 package • WinTV-HVR-1250 board For the standard WinTV-HVR-1250 products, you will find: • WinTV-HVR Windows Installation CD-ROM with WinTV v7 application with SoftPVR™ and TV Scheduler • Hauppauge remote control transmitter with 2 AAA batteries • Remote control receiver cable For Windows Media Center kits, you will find: • Media Center Remote Control transmitter and two AA batteries • Media Center Remote control receiver/blaster • IR transmitter cable (blaster cable) • USB cable for the Media Center remote control receiver/ blaster box S-Video/Composite: Video input connector. For either S- Video or composite (composite video requires the S- Video to composite adapter). Left/right audio input: Stereo audio input using 1/8” mini stereo jack, from the audio output of your source. ATSC digital TV is over-the-air digital TV for North America. ATSC digital TV typically requires an antenna for reception, and is currently broadcast in 200 cities, with over 1500 TV stations. Note: ATSC digital TV is NOT digital cable TV or digital satellite TV. The WinTV-HVR can receive clear QAM digital cable TV (if you are using WinTV v7 or Windows Media Center with Windows 7 or TV Pack 2008), but it cannot receive digital satellite TV unless WinTV-HVR-1250 is connected to a satellite TV set top box. ATSC digital TV is transmitted in several resolutions, from “standard definition” which is similar to cable TV, up to high definition which has about 16 times the resolution of normal cable TV. In any resolution, ATSC digital TV gives sharper pictures than analog cable TV and near CD quality sound. Clear QAM TV channels are digital cable TV channels which are broadcast “in the clear”. These digital cable TV channels are broadcast in various resolutions, from standard definition up to high definition. 2. What is ATSC digital TV? Connecting the remote control receiver cable Plug the remote control receiver cable into the Remote control receiver connector on the WinTVHVR- 1250. Position the round receiver sensor (at the end of the remote control receiver cable) where is can be “seen” by the remote control transmitter. This is normally at the front of your PC. 5. Installing the WinTV driver and applications Turn on your Windows XP or Vista based PC, and boot into Windows. N N ew: If a 'Found New Hardware' wizard appears, please cancel it and allow windows to load fully before proceeding. Insert the WinTV Installation CD-ROM in your PC’s CD-ROM drive. N N ote: if the CD does not autorun, navigate to the CD and run the 'Setup.exe' file. “Hauppauge WinTV Installation CD” window will appear on the screen. Install the WinTV driver Click the button labeled Step 1: Install drivers. A blue screen will open and begin installing the drivers for your WinTV. Once the drivers have installed, click on the Finish bar to exit. Install the WinTV applications Click the button labeled Step 2: Install WinTV The setup application will then open and begin automattically installing the WinTV application components. Once complete, click OK then Exit. N N ote: the latest driver updates are available at: 6. Running WinTV for the first time To run the WinTV v7 application for watching TV, recording videos and playing them back on your WinTV-HVR-1250 has in tuner for analog digital ATSC and digital To receive ATSC, you will need receive digital you will need a cable TV connection. WinTV-HVR uses your PC or decoding of high definition is very processor intensive, TV programs depends upon CPU resources might affect the digital TV. Slow video, jerky video and momentary pausing of video are all results of For the best ATSC digital TV reception, a roof top ‘or ‘High gain’ antenna is recommended. In the U.S., a good ATSC digital antenna selector can be found TitanTV.com under Resources. 3. Installing the WinTV-HVR-1250 board To install, switch off the computer and remove the computer The manufacturer of your PC supplies instructions on removing the PC cover. N N ote: Your PC could be damaged by electrostatic discharge. Avoid contacting the earthed chassis of your PC, before you open the pci card. • Locate a free PCIe slot. Unscrew and remove the metacover plate which of the empty slot. • Plug the WinTV-HVR-1250 board into the PCIe slot, and screw the WinTV-HVR-1250 metal cover plate to the PC. • Replace the computer cover. 4. Connecting the cables TV connector: either cable TV for analog and clear QAM digital or a TV antenna for ATSC TV. N N ote: clear QAM digital cable TV is only available in some areas and through some cable TV operators. Contact your local cable TV company to see if they support clear QAM digi- TV Connector tal cable TV. To watch clear QAM digital cable for analog or digital T...