Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
Be sure to remove the sticker before using the clock. • Depending on the clock model, its configuration may differ somewhat from that shown in the illustration. Current time (Hour, minutes, seconds) Day of the week Current temperatureDate (month - day) PM indicator Alarm time Snooze on indicator Alarm on indicator Alarm Off Snooze Alarm On 1 Operation Guide DQ-745/PQ-65 2 GENERAL GUIDE 11111SNOOZE/LIGHT button •Press this button to illuminate the display for about five seconds. •Pressing this button while the alarm is sounding stops the alarm. 22222Alarm Mode selector SNZ: Snooze alarm on ON: Alarm on OFF: Alarm off 33333+ / – buttons Use these buttons to change the alarm time or the setting that is flashing on the display. 44444°C/°F button Press this button to toggle the temperature units between Celsius and Fahrenheit. 55555SET button Use this button when setting the current time. 66666RESET button Press this button to reset the clock after replacing its batteries. 77777SOUND Selector (DQ-745 only) Use this selector to select the alarm volume. •Buttons marked “INVALID” have no function. USING THE CLOCK 1. Press the SET button (5) to cycle through the setting screens as shown below. 12-hour/24-hour Timekeeping ScreenTime Setting ScreenMonth and Day Setting ScreenYear Setting Screen Normal Timekeeping Screen 2. While the screen you want is displayed, use the + and – buttons (3) to change the flashing digits. ALARM SET Press + to increase the flashing digits. Press – to decrease the flashing digits. Press + to increase the flashing digits. Press – to decrease the flashing digits. DQ-745 PQ-65 •Holding down + or – changes the flashing digits at high speed. •You can set the year in the range of 2000 to 2039. The day of the week is set automatically in accordance with the date setting. •Pressing + or – while the Time Setting Screen is on the display causes the seconds count to be reset to 00. •Each press of + or – while the 12-hour/24-hour Timekeeping Screen is on the display toggles between 12-hour and 24-hour timekeeping. 3. After making the settings you want, use the SET button (5) to display the Normal Timekeeping Screen. •The clock automatically returns to the Normal Timekeeping Screen if you leave a setting screen on the display for about three minutes without performing any operation. Alarm Mode selector SNZ ON OFF Description The alarm sounds at the preset time for one minute, and up to seven more times every five minutes thereafter. Even if you stop the alarm by pressing the SNOOZE/ LIGHT button (1), the alarm sounds again five minutes later. •The indicator flashes on the display to indicate that the snooze feature is activated. The alarm sounds at the preset time for one minute. The alarm does not sound. USING THEALARM The alarm sounds when the alarm time you set is reached. You can also use the Alarm Mode selector (2) to select the snooze alarm feature. Setting the Alarm Time Use the + and – buttons (3) to set the alarm time. Pressing the...
Эта инструкция также подходит к моделям:Регистраторы времени - MA0505-EA (611.72 kb)
Регистраторы времени - PQ-65 (611.72 kb)