Оценок - 2, средний балл: 3 ( )

Производитель: Black Box Размер: 2.78 mb Название файла: Язык инструкции:

If OATS compliance is necessary, the Time Zone must be set to the default of (GMT-05:00) Eastern Time (US & Canada). 3. Click on 12 hour (AM/PM) or 24 hour (Military) (default = military) to set the display format. This format will also be used on transaction reports. 4. Select to show either the day of the month or seconds on the clock display (default = seconds). 724-746-5500 | blackbox.com 4-5 Auto-Sync Time Clock 5. Check whether or not daylight savings should be applied. This option should only be un-checked in areas where DST is not used and OATS compliance is not required. Select the week, day, and month of the Start and End dates from the dropdown Start and End times (hour/minute). Default = DST enabled. Default = Military (i.e., 17:00 = 5:00pm) Figure 4-4. General Clock Settings. 6. Click on the button to save the general clock settings. NOTE: If “Apply Daylight Savings” is checked, the standard Start and End dates/times currently observed will be automatically entered. Modification is only necessary for special circumstances (see next paragraph). NOTE: Daylight Saving Time is NOT observed in Hawaii, American Samoa, Guam, Puerto Rico, and the Virgin Islands and in most of Arizona, with the exception of the Navajo Indian Reservation in Arizona. The Auto-Sync Time Clock will automatically advance by one hour at the beginning of Daylight Saving Time on the second Sunday in March. It will automatically return to Standard Time on the first Sunday in November. If you live in an area that does not observe Daylight Saving Time, uncheck the box “Apply Daylight Saving.” 7. Click on the Network tab and the Clock Settings screen for network will appear (see Figure 4-5). 4-6 724-746-5500 | blackbox.com Chapter 4: Operation Figure 4-5. Network Clock Settings. 8. Select to Use DHCP (Dynamic Host Configuration Protocol) which is a protocol used by networked devices (clients) to obtain the parameters necessary for operation in an Internet Protocol network. This is the default. Or Select Use Fixed IP Address when desiring to use a static IP address, and enter the following: . Fixed IP address for the Web Clock. Obtained from network administrator. . Subnet Mask for the Web Clock. Obtained from network administrator. In computer networks based on the Internet Protocol Suite, a subnetwork, or subnet, is a portion of the network's computers and network devices that have a common, designated IP address routing prefix. . Default Gateway for the Web Clock. May have to obtain from network administrator. A default gateway is a node (a router) on a computer network that serves as an access point to another network. 9. Select Service Port (default = 7) for the Auto-Sync Time Clock’s built-in TCP service that allows a user to initiate an operation from an external application (i.e., the Auto-Sync Utility functions). Any unreserved port 1 thru 65535 can be used. 10.Select Enable Zero Configuration (default) for Zero Configuration to obtain the parameters necessary for operation in an Internet Protocol network at a local level. This is where you would turn Zero Configuration off if you did not want the clock to broadcast its location. The most direct way to get to the clock when this function is disabled is to know the IP address. 11.When finished entering the network settings, click on the button to save network settings for the clock. 724-746-5500 | blackbox.com 4-7 Auto-Sync Time Clock 4.1.6. How to Set the Print Options 1. Click on the General Settings link under Print, and the Print General Settings screen will appear (see Figure 4-6). 2. Select the Minute Format from the dropdown menu (default = 60th). An example of this would be: if the actual time is 16:30 (4:30PM), 10th = 16.5, 20th = 16.50, 60th = 16:30, and 100th = 16.50. Figure 4-6. Print General Settings. 3. Select the Dual Print, On or Off. This determines whether you print one line (Line 1) or both lines (Line 1 & Line 2). When Dual Print is turned On (default = Off), and the print method is set to Paper Detect Only (P) (see Figure 2-17) two different print styles (lines) can be printed sequentially, without having to push the auxiliary Symbol Print Bar. The following is an example for a custom print style with the Dual Print feature turned On to show the sequence for Line 1 & Line 2 imprints: First imprint (Line 1)• 2008/09/22 00:51 13s Second imprint (Line 2)• DESK 1234 4. Enter a value, in seconds, for the dual print to timeout (default = 10 seconds). For example, when set to 10, the 2nd print line will not be active if more than 10 seconds have passed since the 1st line was printed. The range is 0 to 60 seconds. When zero (0) is used there is NO timeout; the 2nd line is always active. NOTE: When Dual Print On is selected, the clock will display “L2” where the seconds/date is normally displayed. L2 will be displayed after Line 1 is printed (see the figure) to prompt you that Line 2 (L2) will be printed with the next print stamp. This prompt will remain displaye...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: