intérieur 0 AuBenleiter (mm) Outer conductor 4,5 5,8 (7.5) Cond. extérieur AbsetzmaBe (mm) measures for baring Mesures pour l’enlévement 0 Außenleiter (mm) Outer conductor 4,5-5,8 Cond. extérieur 5,8-7,5 15,5 ± 1 17,0 ± 1 6,5 12,0 Außenmaße Dimensions Dimensions 936.2357/0/0203/1.2 d/e/f КПТННЕ1П Technische Daten Technical data / Données techniques Frequenzbereich Frequency range Gamme de fréquences MHz 0,15-2400 0,15-47 47-862 862-215G Verteildämpfung Distribution lo

Enamels, lacquers, polyurethane, urethane top coats (including basecoat/clearcoat) and all primers can be applied. The spray gun has fluid and pattern controls. This spray gun is supplied with a 20.3 oz (600 ml) gravity feed cup. Description Le HDS590 est un pistolet vaporisateur à alimentation par gravité HVLP conçu pour la pulvérisation de matériaux de viscosité légère à moyenne. Appliquez les émaux, les laques, le polyuréthane, les couches de finition uréthane (y compris couches de fondatio

(305 mm) long 18 in. (457 mm) long 24 in. (610 mm) long Fits all Graco high pressure spray guns. (Adapters available for other guns) Includes DripLess™ Tip Guard. Order spray tip separately. GUN NOT INCLUDED WARNING Pressure Relief Procedure To reduce the risk of serious bodily injury, including fluid injection, splashing fluid or solvent in the eyes or on the skin, or injury from moving parts or electric shock, follow this procedure whenever you shut off the sprayer, when checking or ser

PART NO. DESCRIPTION QTY 1 180-137 NUT, gun 1 2 180-136 ADAPTER, tip 1 3 166-969 WASHER, tip 2 4 220-222 TIP GUARD 1 5 EXTENSION TUBE 218-244 12 in. for Model 223-390 1 218-245 18 in. for Model 223-391 1 218-246 24 in. for Model 223-392 1 GUN NOT INCLUDED ACCESSORIES Must be purchased separately. SPRAY GUNS Includes Reverse-A-Clean IV DripLess™ Tip Guard and a SwitchTip™ “SILVER” GUN 220-954 5000 psi (350 bar) Max. Working Pressure SwitchTip ™ is size 517. “CONTRACTOR” GUN 220-95

Now clear the tip or hose. -WARNING- Hazard of Using Fluids Containing Halogenated Hydrocarbons Never use 1,1, 1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in this equipment. Such use could result in a serious chemical reaction, with the possibility of explosion, which could cause death, serious bodily injury and/or substantial property damage. Consult your fluid suppliers to ensure that the fluids being used are compatible

Prevents damage to crankshafts and piston cylinder walls by protecting exposed piston rod bolts, and at the same time, safely guides piston rods during removal and installation. TO REMOVE PISTON: 1. Remove nuts from piston rod bolts. 2. Place small adapters into prong ends and onto rod bolt ends. 3. Tap base of tool with palm of hand or hammer to break loose rod cap union. 4. Remove bottom rod cap and small adapters. 5. Place prong ends of tool onto piston rod bolts and push on base to rem