Оценок - 3, средний балл: 4.7
(
)
)
|
Фрагмент инструкции
SAFETY PRECAUTIONS This manual contains important information that ALL users should know and understand BEFORE using the equipment. This information relates to USER SAFETY and PREVENTING EQUIPMENT PROBLEMS. To help you recognize this information, we use the following terms to draw your attention to certain equipment labels and portions of this manual. Pay special attention to any label or information that is highlighted by one of these terms.: WARNING Important information to alert you to a situation that might cause serious injury or loss of life if instructions are not followed. CAUTION Important information that tells how to prevent damage to equipment. NOTE Information that you should pay special attention to. SAFETY WARNING FIRE AND EXPLOSION Solvents and coating materials can be highly flammable or combustible, especially when sprayed. • Work stations must be provided with adequate ventilation/exhaust to prevent the build-up of flammable vapours. • Smoking and naked flames must not be allowed in the spraying or mixing areas. • Fire extinguishing equipment must be provided in the spraying and mixing areas. Users must comply with all local and national codes of practice and insurance company requirements governing ventilation, fire precautions, operation maintenance and housekeeping of work stations. HALOGENATED HYDROCARBON SOLVENTS – for example 1,1,1-Trichloroethane and Methylene Chloride can chemically react with aluminum and galvanised or zinc coated parts and cause an explosion hazard. Read the label and data sheet of the material you intend to spray. This equipment, as supplied, is suitable for use with Halogenated Hydrocarbons and the user must ensure that all other equipment in the system is also suitable for use with these materials. DO NOT SPRAY MATERIALS CONTAINING THESE SOLVENTS EXCEPT WITH EQUIPMENT SPECIFICALLY DISIGINATED BY THE MANUFACTURER AS BEING SUITABLE FOR SUCH USE. STATIC ELECTRICITY – is generated by fluid moving through pipes and hoses. A static spark, capable of igniting certain solvents and coating materials, could be produced by high fluid flow rates. To prevent the risk of fire or explosion, earth continuity to the spray equipment and object being sprayed should be maintained. PERSONAL PROTECTIVE EQUIPMENT TOXIC VAPOURS – When sprayed, certain materials may be poisonous, create irritation or otherwise be harmful to health. Always read carefully all labels and safety/performance data for the material being sprayed and follow any recommendations. IF IN DOUBT, CONSULT THE MATERIAL SUPPLIER. -1 • The use of respiratory protective equipment is recommended at all times when spraying. The type of respiratory protective equipment used must be compatible with the material being sprayed and the level of concentration. • Always wear eye protection when spraying or cleaning the equipment. • Gloves must be worn for spraying or cleaning the equipment when certain coating materials and solvents are used. TRAINING Personnel should be given adequate training in the safe use and maintenance of this equipment. Training courses on all aspects of the equipment are available. For details contact your local representative. The instructions and safety precautions contained in this literature and the literature supplied with the coating material should be read and understood before the equipment is used. MISUSE • All spray guns project particles at high velocity and must never be aimed at any part of the body. • Never exceed the recommended safe working pressures for any of the equipment used. • The fitting of non-recommended or non-original accessories or spare parts may create hazardous conditions. • Before dismantling the equipment for cleaning or maintenance, all pressures, air and material, must be isolated and released. The disposal of non-metallic materials must be carried out in an approved manner. Burning may generate toxic fumes. The removal of waste solvents and coating materials must be carried by an authorized local waste disposal service. The materials used in the construction of this equipment are (bearing in mind the warning on Halogenated Hydrocarbon) solvent resistant enabling the equipment to be cleaned using gun cleaning machines. However, this equipment must not be left inside the gun cleaning machine for prolonged period of time after the automatic cleaning cycle has been completed The solvents used in the gun cleaning machine should be regularly checked to insure that the equipment is not flushed through with contaminated material. Follow the recommendations of the machine manufacturer. NOISE LEVENLS The continuous A-weighted sound pressure level of this spray gun may exceed 85 dB(A) depending on the air cap/nozzle set-up being used. Sound levels are measured using an impulse sound level meter and analyser, when the gun is being used in a normal spraying application. Details of actual noise levels produced by the various air cap/nozzle set-ups are available on request. DESCRIP...