Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
6. Press any numeric key to add extra numbers. Or Press DEL/CH key to move the cursor to the digit 7. Then press other numeric key to replace 7. 7. Press ENTER after finishing the digits. 8. The display shows ABC with the cursor blinking after the character C. 9. Press any numeric key 2 to 9 to add extra characters. Or Press DEL/CH key to move the cursor back to character C. Then press any other numeric key to change this character. 10.Press ENTER to finish. The modified 19 E N G L I S H PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 20 Memory Storage characters and numbers will replace the original phone record. 11.The display will show NUMBER STORED. Adding the EMERGENCY Number 1. Unit must be in standby mode only. 2. Press MODE key twice. The display will show PHONEBOOK for 1 second and then display the first available record. 3. Press the UP(^) or DOWN (Ў) button to go to the record to be stored to the EMERGENCY key. 4. Press and hold the EMERGENCY key for 2 seconds. 5. The phone number is copied to the EMERGENCY key. The LCD will display MEM STORING for one (1) second and the handset will give a success keynote. Dialing the EMERGENCY Number 1. Unit must be in standby mode only. 2. Press the EMERGENCY key once. 3. The display will show the stored name and number for 5 seconds. Otherwise it will show -NO RECORDS-. 4. Then the handset goes off-hook and dial out the stored numbers. Or 5. Press TALK key to make handset goes off-hook. 6. Press the EMERGENCY key once. The display will show the stored name and number for 1 sec. Then the numbers will be sent out. Deleting the EMERGENCY Number 1. Unit must be in standby mode. 2. Press the EMERGENCY key once. 3. If this key has been programmed, the display will show the stored number. Otherwise, it will show MEMORY EMPTY. 4. Press DEL/CH key once to delete this number. 5. The display will flash DELETE ?. 6. Press DEL/CH to delete. The handset will give a success keynote. PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 21 Caller ID Operations VISUAL MESSAGE WAITING INDICATOR (VMWI) NOTE: This is a service that is provided through your local telephone company. If the C440 finds that there is voice message to be retrieved, it will turn on the Message Waiting Indicator (the ENTER key). To retrieve the voice message, press the ENTER key while the indicator is on. The handset will go off-hook and dial the stored Voicemail number. CALLER ID INFORMATION This function is turned off when EASY MODE is set to ON during setup. Caller Information When somebody calls, the received caller information is displayed on the LCD. If the call is answered by this phone, this caller information is considered “old”. Otherwise, the Caller ID information will be stored in the call log. Information which has not been reviewed will be considered as “new call”. The NEW CALL LED will blink. The top row displays the time and date of the call. The second row displays the caller’s ID or is blank if there is no information. The third row displays the incoming telephone number. If the number is longer than twelve (12) digits, the LCD will toggle the displayed number between the first 12 digits and the remaining digits. Receiving Call Waiting Caller ID When you are on an existing call, you will hear a beep and the display will show incoming call waiting Caller ID information. If you access the call waiting call, the Caller ID information will disappear and the Time/Day screen will appear. If you do not access the call waiting call, the Caller ID information will be transferred into the Caller log. This caller information is considered “old”. Unknown Call If a call is from another country or the caller’s number is not available, UNKNOWN is displayed and stored in the Caller ID log. Blocked Call If the number is blocked or withheld, PRIVATE is displayed and stored in Caller ID log. Repeated Call If this is a repeated call, it means the same number called before and has not been reviewed. CALLER ID Review If there is new call information, the MODE button will flash RED. During standby mode, press MODE button once. LCD will display CID MODE and then the last Caller ID information. 21 E N G L I S H PM080404_C440_RevB_E#34CA7F.qxd 8/14/04 15:08 Page 22 Caller ID Operations Press UP (^) or DOWN (Ў) again to view the Caller ID content. Press DOWN (Ў) to scroll the caller ID information from the most recent record. Or, press the UP (^) button to scroll the Caller ID information from the oldest record. If the caller’s number is more than (12) digits, the LCD will toggle the displayed message between the first 12 digits and the remaining digits. If the Caller ID list is empty, the display will show - NO CALLS -. ¦ At anytime, the user can press FLASH button one time to go back to standby mode. Or ¦ It will go back to standby automatically at 30 seconds time out if there is no action. SAVING CALLER ID INFORMATION TO PHONEBOOK 1. While reviewing Caller information, press PROG key once. 2. The display show...