Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
To change the channel of the external flash, refer to the operating instructions supplied with it. Using the function 85 Adjusting the brightness of the image (Exposure, Flash compensation, Metering) Adjusting the brightness of the image (Exposure, Flash compensation, Metering) Except for recording mode M, the exposure is automatically selected (Automatic exposure). Based on the exposure acquired by the automatic exposure, you can perform exposure compensation by shifting the exposure to either the + side or the – side, depending on your preference. You can make the entire image brighter by shifting to the + side. The entire image becomes darker when you shift it to the – side. Adjust in the – Base exposure Adjust in the + direction direction button 1 Press the button. • The exposure compensation screen is displayed in the viewfinder mode. 2 Adjust the exposure with the control dial. Toward + (over): Brightens an image. Toward – (under): Darkens an image. Standard exposure 3 Adjust the focus and shoot the subject. Shooting techniques 3 Adjust the focus and shoot the subject. Shooting techniques • Adjust the compensation level by checking the recorded image. • Using bracket shooting, you can shoot multiple images with the exposure shifted to the plus or minus sides (page 99). Note • This item cannot be set when the exposure mode is set to AUTO, M (Manual exposure) or Scene Selection. To shoot while checking the screen using the histogram The histogram displays the luminance distribution that shows how many pixels of a particular brightness exist in the picture. To display the histogram, press DISP on the control button (pages 38 and 102). Number of pixels Dark Light Using the function 87 The exposure compensation will change the histogram accordingly. The right illustration is an example. Shooting with the exposure compensation on the positive side brightens the whole picture, making the entire histogram shift to the bright side (right side). If the exposure compensation The exposure compensation will change the histogram accordingly. The right illustration is an example. Shooting with the exposure compensation on the positive side brightens the whole picture, making the entire histogram shift to the bright side (right side). If the exposure compensation Notes • The histogram displayed in Live View mode does not indicate the final recorded image. It indicates the condition of the image just monitored on the LCD monitor. The histogram will differ based on aperture setting, etc. • The histogram differs between shooting and playback in the following situations: – When firing the flash. – When the subject has low intensity, such as night scenery. Adjusting the amount of flash light (Flash compensation) When shooting with the flash, you can adjust the amount of flash light alone, without changing the exposure compensation. You can only change the exposure of a main subject which is within the flash range. MENU button t 1 t [Flash compens.] t Select the desired setting Toward +: Makes the flash level higher. Toward –: Makes the flash level lower. Notes Notes This item cannot be set when the exposure mode is set to AUTO or Scene Selection. • If you have adjusted the flash level, appears on the LCD monitor/in the viewfinder when the built-in flash is pulled up. When you adjust it, be careful not to forget to reset the value. • The higher flash effect may not be visible due to the limited amount of flash light, if the subject is outside the maximum range of the flash. If the subject is very close, the lower flash effect may not be visible. Exposure compensation and flash compensation Exposure compensation changes the shutter speed, aperture, and ISO sensitivity (when [AUTO] is selected) to perform the compensation. If the flash is used, the amount of flash light is also changed. However, flash compensation only changes the amount of flash light. Selecting the method for measuring the brightness of a subject (Metering mode) Fn button t [Metering mode] t Select the desired mode (Multi segment) This mode measures light on each area after dividing the total area into multiple areas and determines the proper exposure of the entire screen. (Center weighted) While emphasizing the central area of the screen, this mode measures the average brightness of the entire screen. (Spot) This mode measures light at or around the focus area located in the center of the frame. Shooting technique • Use (Multi segment) metering for general shooting. Note • When the exposure mode is set to AUTO or Scene Selection, [Metering mode] is fixed to (Multi segment) and you cannot select other modes. Using the function 89 Setting ISO Setting ISO 1 Press ISO on the control button to display the ISO screen. 2 Select the desired value with v/V on the control button. • The larger the number, the higher the noise level. Notes • When the exposure mode is set to AUTO or Scene Selection, ISO is fixed to AUTO and you cannot select other ISO numbers. • When ...
Эта инструкция также подходит к моделям:Фотоаппараты - DSLR-A390L (5.98 mb)
Фотоаппараты - DSLR-A390Y (5.98 mb)