If an outside antenna is connected to the digital satellite receiver, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the NEC, NFPA No. 70 1987, provides information with respect to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of the grounding conductors, location of antenna discharge unit, connection to grounding electrodes, and re

If you see a black screen with the message: “Searching for satellite signal. To access related utilities, press .” press the key. Otherwise, press keys in the following order to navigate to the INSTALLATION screen: · to display the MAIN MENU · or to move the highlight over the Setup Menu button · to display theSETUP MENU · or to move the highlight over the Installation button · to display the INSTALLATION screen You should see a meter displaying your signal strength. The INSTALLATION Screen The

The ZIP Code entered here will specify what terrestrial program information should appear in the Advanced Program Guide™. Area 2 Area 2 may be a neighboring city or distant terrestrial station you wish to receive from the same VHF/UHF antenna used in Area 1. The ZIP Code entered here will specify what terrestrial program information should appear in the Advanced Program Guide™. Cable TV You have connected a cable television service. The cable provider entered here will specify what cable program

A numeric value for the strength ranges from 0 to 99. While your signal strength may vary, refer to the following map to determine the suggested signal strength goal for your area: Typical signal strength results. Your actual signal strength may vary. 5) Gently continue turning the satellite dish antenna reflector a small amount as you were turning it when you began receiving a signal. Continue to adjust the satellite dish antenna in this fashion until the signal strength meter reaches the highe

If the channel call sign is fewer than four letters, you may need to press to indicate that you are finished. If more than one channel shares the same set of key (i.e., “CNN” and “COM”, both using ), the next matching occurrence is used. If that was not the channel you wanted, just press to find the next occurrence of that key sequence. It is important that you enter the channel call sign exactly. With experience, you will become more familiar with the channel name abbreviations that are used. T