Оценок - 2, средний балл: 4
(
)
)
|
Фрагмент инструкции
Also on the microphone. Press to toggle between your favourite channels. The CH1, CH2, or CH3 symbol appears on the LCD to show which favourite channel is selected. To scan only one of your favourite channels, press 3CH then immediately press and release SCAN. If you want to scan all three favourite channels, press 3CH then immediately press and hold SCAN. To add a favourite channel for the first time, select that channel then hold 3CH to store it in the CH1 location. Repeat the procedure to store two more favourite channels in the CH2 and CH3 locations respectively. If you try and add another favourite channel it will overwrite the existing CH3. CH1 and CH2 remain unless you delete them. To delete a favourite channel, select that channel then hold down 3CH until the CH1, CH2 or CH3 symbol disappears off the LCD. Channel Bank. Press to toggle between USA, International or Canadian channel banks. The selected channel bank is displayed on the LCD along with the last used channel. All the channel charts are shown in Appendix C. Scan. Press to scan between your current channel and the priority channel in DUAL or TRI WATCH mode. The weather channel is also scanned if the USA channel bank is selected and the weather alert mode (ALT) is ON. Hold down SCAN to enter ALL SCAN mode where the priority channel is checked every 1.5 seconds. When a signal is received, scanning stops at that channel and BUSY appears on the screen. If the signal ceases for more than 5 seconds, the scan restarts. Press ENT to temporarily skip over (lock out) an “always busy” channel when in ALL SCAN mode and resume the scan. An X is shown on the screen to designate a skipped channel. Note that it is not possible to skip over the priority channel. Press SCAN to stop at the current channel. Channel Select. Also on the microphone. The current channel is shown on the screen in BIG digits with an appropriate designator suffix A or B in small letters below the channel number. Press + or -to step through the available channels one at a time, or hold down to scroll rapidly through all the available channels. See Appendix C for a listing of channel charts. EAGLE - EVR-150 Installation and Operation Instructions Alphanumeric Entry. This key can also be used for menu selection and for alphanumeric entry. Press + or - to scroll the cursor up or down menu options when navigating menus. When editing an item containing only numbers, press - to count through the numbers or hold down to scroll rapidly. To enter a character, press + to step through the alphabet or hold down to scroll rapidly. ENT Enter. Use ENT when navigating menus, to confirm entries and edits. ESC Escape. Use ESC when navigating menus, to clear incorrect entries, to exit from a menu without saving changes, and to back up to the previous screen. CALL/MENU DSC Setup Menu and DSC Call Menu. Press to enter the DSC Call Menu and make DSC calls. See Section 5. Hold down to enter the DSC Setup Menu and customize your radio. See Section 4. DISTRESS Send DSC Distress Call. See Section 6. PTT Press To Talk (located on the MIC handset). Press PTT to transmit at any time on an allowable channel. This automatically exits you from menu mode and stops scanning. You must release PTT to receive a signal. If PTT sticks, a built-in timer will automatically shut down a transmission after five minutes and sound the error beeps. EAGLE - EVR-150 Installation and Operation Instructions Section 2 - The Radio Menu (MENU)Section 2 - The Radio Menu (MENU) 2-1 Radio Menu Options (Menu) The following options are available through MENU (or CALL/MENU): MANUAL SETTING Maintain your buddy list. See Section 2-2. Set radio sensitivity. See Section 2-3. Set backlight level. See Section 2-4. Set contrast level. See Section 2-4. Set position & UTC manually. See Section 2-5. Set local time and time format. See Section 2-5. USER MMSID GROUP SETUP INDIV REPLY DSC FUNC LL REPLY DSC Setup Menu. See Section 4. Make DSC calls. See Section 5. CH NAME RING VOLUME BEEP VOLUME INT SPEKER WATCH MODE WX ALERT COM PORT Radio Setup Menu. See Section 3. Turn the GPS Simulator on/off. See Section 2-6. Reset factory settings. See Section 2-7. Sections 1-3 and 1-4 explain how to navigate around the menu and enter, save and change data. EAGLE - EVR-150 Installation and Operation Instructions 2-2 Maintain Your Buddy List (BUDDY LIST) Use the Buddy List to store the names and associated MMSIs of 20 favourite people. Names are stored in the order of entry, with the MENU SELECT most recent entry shown first. >BUDDY LIST LOCAL/DIST The following sections show to use BUDDY LIST to add, edit, and BACKLIGHT delete entries on your buddy list. Section 5 explains how to call a buddy. 2-2-1 Add an Entry BUDDY LIST ENTER NAME ENTER NAME BOB >MANUAL NEW –––––––––––– BOB 123456789 ALEX ENTER MMSID ENTER MMSID >STORE TOM ––––––––– 123456789 CANCEL 1. Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT. 2. Enter the buddy name, one character at a time (this ...