Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Check if the voltage indicated on the type plate corresponds to the local mains voltage before you connect the appliance. . Never leave the iron unattended when it is connected to the mains. . Never immerse the iron in water. . Keep the appliance out of the reach of children. . The soleplate of the iron can become extremely hot and may cause burns if touched. Do not allow the cord to come into contact with the soleplate when it is hot. . Do not put perfume, vinegar, starch, descaling agents, ironing aids or other chemicals in the water tank. . When you have finished ironing, when you clean the appliance, when you fill or empty the water tank and also when you leave the iron even for a short while: set the steam control to position O, put the iron on its heel and remove the mains plug from the wall socket. . If the mains cord is damaged, it must be replaced by Philips, a service centre authorised by Philips or similarly qualified persons in order to avoid a hazard. . Never use the appliance if it is damaged in any way. . This appliance is intended for household use only. Before first use 1 2 3 Check if the voltage indicated on the type plate corresponds to the local mains voltage before you connect the appliance. Remove any sticker or protective foil from the soleplate. Heat up the iron to maximum temperature and pass the iron over a piece of damp cloth for several minutes to remove any residues from the soleplate. The iron may give off some smoke when you use it for the first time This will cease after a short while. ENGLISH Preparing for use Filling the water tank C C C Remove the mains plug from the wall socket. Set the steam control to position O (= no steam). Open the filling cap. 1 2 3 (types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only) 4 Tilt the iron. 5 Use a measuring cup to fill the water tank up to maximum level. 6 Close the filling cap (click!). (types GC2225, GC2220, GC2215, GC2130, GC2125 and GC2120 only) If the tap water in your area is very hard, we advise you to use distilled water. Do not use vinegar, starch or chemically descaled water. Do not fill the water tank beyond the MAX indication. Setting the temperature 1 2 Put the iron on its heel. Set the temperature dial to the required ironing temperature by turning it to the appropriate position. -Check the garment label for the required ironing temperature. -1 Synthetic fabrics (e.g.acrylic,viscose,polyamide,polyester) -1 Silk -2 Wool -3 Cotton, linen -If you do not know what kind of fabric(s) a garment is made of, determine the right ironing temperature by ironing a part that will be invisible when you wear the garment. -Silk, woollen and synthetic materials; iron the reverse side of the fabric to prevent shiny patches. Avoid using the spray function to prevent stains. 3 4 Put the mains plug in an earthed wall socket. When the amber temperature light has gone out, wait a while before you start ironing. B The amber pilot light will go on from time to time during ironin...
Эта инструкция также подходит к моделям:Утюги - GC2115 (2.31 mb)
Утюги - GC2110 (2.31 mb)
Утюги - GC2120 (2.31 mb)
Утюги - GC2125 (2.31 mb)