Оценок - 5, средний балл: 4.2
(
)
)
|
Фрагмент инструкции
Modifying or tampering with your system’s internal components can cause a malfunction and might invalidate the system’s warranty and void your FCC authorization to operate it. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada. iP45 Quick start RESET RESET To open the iP45, grasp the front lid of the unit and gently pull upwards and release into lid rest. To close, pull lid upwards and gently press bottom edge towards rear hinge. 1: Open unit Select the proper insert for your iPhone or iPod from the table below and place in dock. Gently place iPhone/iPod into dock (iPhone/iPod must not be in a “skin” or case). iPhone/iPod will charge while docked. Press the Button on the iP45 to play your iPhone/iPod. Attach AC adaptor cable to the DC jack on back of the iP45 and plug the other end into a working wall socket to play and charge iPhone/iPod and to charge the internal battery. 2: Connect to AC power 3: Dock iPhone/iPod iPod touch 2G nano 5G iPhone 3G iPhone 4 nano 6G/touch 4G Use this insert insert 16 insert 18 Insert 15 Insert 19 insert 20 nano 6G iPhone 3G/3GS iPod touch 2G/3G iPhone 4 nano 5G For this iPhone/iPod iPod touch 4G NOTE: If you do not have an insert for your iPhone/iPod, please visit or call iHome toll free at 1-877-446-6301 to purchase one. 4: Time • To use time sync: dock your iPhone/iPod and press the Button. The unit will sync to the time on your iPhone/iPod. • To set time manually: move the DST switch on rear of unit to -1 or +1 (subtracts or adds an hour for standard time or daylight saving time). • Press & hold the Button until the hour display flashes. Press the / buttons to set the current hour. • Press the Button. The minute display flashes. Press the / buttons to set the current minutes. • Press the Button. The year flashes. Press the / buttons to set the current year. • Press the Button. The date flashes. Press the / buttons to set the current date and day. • Press the Button to confirm settings. auxradioiPodiPhonewake-topreset 1 Controls and Indicators auxadioPodPhonewake-topreseradioauxAlarm Button Snooze Button Sleep Button Remote Control Sensor Radio Preset Button Time sync/set Button Volume Up Button BonGiovi DPS (B) Button Dock Volume Down Button Play/Pause Button EQ Button Reverse Button Forward Button Radio/AUX Button Power/ Reset Alarm Button Lid rest Back panel DST Switch Aux-in/ FM antenna Jack Mono/Stereo radio mode DC Jack Remote auto/on Switch iP45 Display Time Display PM Indicator Low Backup Battery Indicator Alarm Indicator Rechargeable Battery Status Indicator auxradioiPodiPhonewake-topresetPreset / iPhone / iPod / Radio / AUX / Wake-to / Sleep indicators 2 Getting Started Thank you for purchasing the iP45. Designed specifically to work with your iPhone and iPod, this system provides high quality audio performance that brings out the best in your music and lets you wake and sleep to it anywhere. Please read this instruction carefully before operating the iP45 and keep it for future reference. Connect AC Adaptor Connect the AC adaptor cable plug into the DC jack on the back of the system, then plug the AC adaptor into a working outlet. While connected to AC power, the iP45 will charge your docked iPhone or iPod as well as the internal lithium ion battery until fully charged. Installing/Replacing the Clock Backup Battery This model is equipped with a battery back up circuit that will maintain the time and alarm time settings, as well as the radio station preset memory settings and EQ settings, in the event of a temporary power interruption. The battery back up circuit will also operate the buzzer alarm to wake you up even if the power is out at the selected wake up time. The battery back up circuit requires one CR2032 lithium battery, included. The lithium battery was included in the package with this instruction manual. To install the backup battery: 1. Make sure unit is connected to AC power, otherwise you will lose settings during battery installation. 2. Close the lid and place the unit upside-down on a flat surface to expose the backup battery compartment. 3. Remove the battery compartment cover by sliding it in the direction of the arrow as illustrated. 4. Insert the included CR2032 battery in the backup battery compartment with the “+” side facing up, as illustrated. 5. Replace the battery compartment cover. Place the unit right side up, open the lid, and confirm that the backup battery icon is not flashing in the display. When the backup battery is getting weak the Low Backup Battery Indicator will begin flashing in the display. When you see this flashing indicator you should replace the backup battery as soon as possible. Purchase a replacement CR2032 battery, available wherever batteries are sold, and follow steps 1 through 4 above to install the replacement battery. IMPORTANT: When replacing the backup battery be sure to have the unit connected to ...
Эта инструкция также подходит к моделям:Радиоприемники - IP45 (288.95 kb)