Оценок - 4, средний балл: 3.8
(
)
)
|
Фрагмент инструкции
Quick selection: press and hold 19 Power indicator normal selection: press repeatedly 20 Program indicator 7 HOUR Skip/fast search/selection ( forward): 21 Random indicator -to skip cd tracks and for fast search within a track 22 Repeat indicator -for quick and normal setting of time and alarm clock 23 FM stereo indicator functions. Quick selection: press and hold, 24 Speakers normal selection : press repeatedly 25 Tuning indicator 8 Stop button: to stop cd playback 26 Function selector switch 9 Snooze button: Stops alarm and repeats 27 Volume control 10 PTS button: to select your favourite cd track to wake up to 28 Cd open tab 11 Alarm 1 button: to set alarm 1 29 Earphone socket 12 Alarm 2 button: to set alarm 2 30 FM wire aerial 31 Dial scale with pointer 32 Battery compartment P.2 Setting the clock time 1 While holding down the TIME button, press the or to set the desired time. The pm indicator will light up when midday has been reached. 2 Release the button to save time setting. Radio operation FM wire aerial To obtain the maximum FM reception fully extend the wire FM aerial (which is located at the rear of the unit) and alter the direction of the wire for best results. The aerial for the MW waveband is located inside the unit. To obtain the maximum MW reception rotate the clock radio. 1 Slide the FUNCTION SELECTOR switch to select MW or FM. 2 Press the POWER on/off button. 3 Adjust the VOLUME control to a suitable level. 4 Slowly adjust the TUNING control to select your desired station. The FM stereo indicator will light up when FM stereo signal is received. 5 To switch off the radio, press the POWER on/off button. To play compact disc 1 Press the POWER/ON OFF button, the power indicator will light up. 2 Open the cd door using cd open tab, load a disc in the cd compartment. Close the cd door by pushing down until it locks into place. 3 Select the cd mode by switching the function selector to cd. 4 Press the play/pause button. The display will show the track number when you begin to play a cd. After a few seconds, the display reverts to the current time. Note : The same button can be used to momentarily interrupt playback. The track number will flash until the button is pressed again. 5 Adjust the volume control until the desired level is reached. 6 Press the stop button to stop playback. 7 To switch off the cd press the power on/off button. P.3 P.4 Other cd functions SKIP/FAST REVERSE SEARCH 1 Press once to skip to the next track or many times as required to reach desired track. Press the to return to the beginning of the current track or as many times as required to go back to desired track. Press or and hold for fast search within the current track. REPEAT button 1 Press once for repeat of current track. The repeat indicator will flash. 2 Press again for the whole cd to be repeated, the indicator will light. 3 Press again to cancel the repeat function. Repeat LED indicator will go out. RANDOM 1 Press playmode button for random playback of all cd tracks. The random LED indicator will light up. 2 Press again to cancel the function. Press twice if program has been set. Repeat and random modes can be used simultaneously. When the cd compartment is empty or a cd is incorrectly loaded or damaged the nd (no disc) symbol will be displayed. Program (see point 2 of waking to cd music) Use PTS button to program. Press the PLAY MODE button twice, program indicator will light up. Setting alarm The unit allows you to select two different wake-up times that can be used separately or simultaneously (ALARM 1 OR 2 OR ALARM 1 and 2). Before setting the alarm move the selector to either alarm 1 or alarm 2 or alarm 1 and 2. ALARM 1: Press and hold the alarm 1 button, and then or to set the desired wake-up time. Release the button to save the setting. ALARM 2: Press and hold the alarm 2 button and proceed as above. Select the alarm selector switch to AUTO then set the function selector switch to FM or MW for radio or to CD for cd music, BUZZER (for buzzer) or OFF to cancel alarm. Waking up to the radio 1 Follow the instructions given under ‘Radio operation’ to select the desired radio station. 2 Set ALARM function switch to AUTO, alarm indicators will light up. P.5 Maintenance Do not expose your cd clock radio to extremes of temperature. The product should be kept in a warm environment free from dust and damp. For external cleaning use only a soft, clean, damp cloth. Use of detergents may damage the finish. Technical specification AC Power supply : 230v 50Hz Battery back-up : 9V DC type 6LR61/PP3 (not included) CD player : Frequency response (3dB) 100Hz to 18kHz Laser : = 780nm Max power = 5mW Radio : FM 88Mhz - 108Mhz : MW 540Khz - 1600Khz WARNING : This unit uses a laser beam. To prevent an accident occuring the unit should only be opened by a qualified engineer. If the door interlocks become defective the laser may cause invisible radiation. Avoid exposure to the beam. If there is a scratch, dirt or finger prints on th...