Оценок - 5, средний балл: 3.4
(
)
)
|
Фрагмент инструкции
Contact an authorized Kenwood dealer for details and complete list of all accessories and options. Model TK-7180 TK-7180H TK-8180 TK-8180H Model TK-7180 TK-7180H TK-8180 TK-8180H GENERAL RECEIVER (Measurements made per EIA/TIA-603) Frequency Range Type 1 Type 2 136-174 MHz 450-520 MHz 450-512 MHz 400-470 MHz Sensitivity (12dB SINAD) Wide Narrow 0.25 pV 0.28 pV Number of Channels* Zone Ch/GID Max. 128 per Radio Max.250 per Zones Selectivity** Wide Narrow 80 dB 70 dB 80 dB 67 dB (Max.512 [Conv.Ch's +GID's] total per Radio) Intermodulation Distortion 75 dB (±50, 100 kHz) Channel Spacing Wide/Narrow Wide 25 kHz, 30 kHz 25 kHz Spurious Response** 90 dB 85 dB Narrow 12.5 kHz, 15 kHz 12.5 kHz Operating Voltage 13.6 V DC±15 °, Audio Output (4 Q Impedance) 4 W with less than 5 % distortion Current Drain Standby Receive Transmit 0.4 A 1.0 A 9.0 A 0.4 A 1.0 A 13.0 A 0.4 A 1.0 A 9.0 A 0.4 A 1.0 A 13.0 A TRANSMITTER (Measurements made per EIA/TIA-603) Duty Cycle __ _ __ Transmit: 20 % Operating Temperature Range -22 °F - +140 °F ( 30 °C - +60 °C) Frequency Stability _ Antenna Impedance d0 Q Channel Frequency Spread Type 1 38 MHz 70 MHz Jype 2 - 70 MHz RF Output Power Type 1 Type 2 Spurious Response 30 to 1 W 50 to 10 W 30 to 1 W 45 to 10 W (490 -520 MHz:25 to 1W) (490 -512 MHz:40 to 10 W) 30 to 1 W 45 to 10 W ..........70 dB.......... Type of Emission Wide Narrow 16K0F3E 11K0F3E 6-5/16" x 1-3/4" x 6-3/16" (160 mm x 45 mm x 157 mm) IIP lbs r 5 k(T' Dimensions (W x H x D), Projections not included Weight (net) ........FCC ID.......... Type 1 K4437303110 K4437303210 K4437313110 K4437313210 Type 2- z - K4437313120 K4437313220 IC Certification Type 1 282F-37303110 - - - Type 2- - - 282F-37313120 * Maximum capability depends on the number of programmed Zone and repeater channels. FM Hum & Noise Wide Narrow 50 dB 45 dB Microphone Impedance Audio Distortion Wide/Narrow 600Q 3% Applicable MIL-STD & IP ** Typical specifications Kenwood follows a policy of continuous advancement in development. For this reason specifications may be changed without notice. FleetSync* is a registered trademark of Kenwood Corporation. LTR® is a registered trademark of Transcrypt International. Standard MIL 810C Methods/Procedures MIL 810D Methods/Procedures MIL 810E Methods/Procedures MIL 810F Methods/Procedures Low Pressure 500 1/Procedure I 500.2/Procedure I, II 500.3/Procedure I, II 500.4/Procedure I, II High Temperature 501 1/Procedure I, II 501 2/Procedure I, II 501 3/Procedure I, II 501 4/Procedure I, II Low Temperature 502 1/Procedure I 502.2/Procedure I, II 502 3/Procedure I, II 502 4/Procedure I, II Temperature Shock 503 1/Procedure I 503.2/Procedure I 503.3/Procedure I 503 4/Procedure I, II Solar Radiation 505 1/Procedure I 505.2/Procedure I 505.3/Procedure I 505 4/Procedure I Rain 506 1/Procedure I, II 506.2/Procedure I, II 506.3/Procedure I, II 506 4/Procedure I, III Humidity 507 1/Procedure I. II 507 2/Procedure II, III 507 3/Procedure II. Ill 507 4 Salt Fog 509 1 /Procedure I 509 2/Procedure I 509.3/Procedure I 509 4 Dust 510 1/Procedure I 510.2/Procedure I 510.3/Procedure I 510 4/Procedure I, III Vibration 514 2/Procedure VIII, X 514.3/Procedure I 514.4/Procedure I 514.5/Procedure I Shock 516.2/Procedure I, II, III, V 516.3/Procedure I, IV, V 516.4/Procedure I, IV, V 516.5/Procedure I, IV, V International Protection Standard Dust & Water Protection P54: Radio itself P54/55: Remote Head with KRK-10 *To meet above Mil810 and IP grade, weather proof microphone KMC-35 or KMC-36 has to be connected. footnotes from Front: ' KRK-10 remote control kit required. 2 DTMF includes PTT ID, Emergency ANI, Manual Encode (KMC-36), Auto-Dial (9 numbers) & Stun. 3 Special Alert Tone Patterns operate for 2-Tone, DTMF, FleetSync* selective call decode. 4 Call Key: 6 keys max.; operates for 2-Tone, DTMF and FleetSync status encode. 5 DB-25 ACC supports 15 Remote Zone/CH/GID selections, KGP-2A/B (KCT-40 re...
Эта инструкция также подходит к моделям:Радиоприемники - TK-7180H (2.03 mb)