Оценок - 4, средний балл: 4
(
)
)
|
Фрагмент инструкции
Topeka New York Chicago Miami Philadelphia Detroit Houston Dallas Seattle Las Vegas Los Angeles San Francisco Sacramento Memphis New Orleans St. Louis Baton Rouge Salem Bismarck South Dakota Tennessee Kentucky Nashville Frankfort Pacific Mountain Central Eastern Summer Winter Winn ipeg Saskatoon Regina Yukon Territory Alberta Saskatchewan Manitoba Ontario British Columbia Quebec Newfoundland Northwest Territories Nunavut Pacific Atlantic Hawaii- Aleutian Alaska Mountain Central Eastern Summer Winter Atlantic Puerto Rico (PST) (MST) (CST) (EST) (AST) (HST) (AKST) (PST) (MST) (CST) (EST) (AST) Canadian time zones Radio Selecting radio mode Press RADIO to switch on radio. Switching band Press RADIO repeatedly to select FM or AM band. Tuning the radio Press / to adjust the radio frequency that shows on the large display. Before adjusting the radio frequency, slide the switch /WAKE1/WAKE2/ to to avoid changing clock or alarm settings. Built-in AFC The Built In Automatic Frequency Control (AFC) works only on FM. It helps to reduce drift on FM reception and keeps the radio locked in on the FM station to which it is tuned. When tuning in FM stations, you may notice that the station you are tuning can be well-tuned on two or three nearby points on the dial. Always tune carefully at the loudest and clearest point. Brightness control Press BRIGHTNESS switch on the back of the unit to Hi (high) or Lo (low) position to adjust the brightness of all the displays at the front of the unit. Setting wake time This unit allows two wake times to be set. 1. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to WAKE 1 or WAKE 2 position. 2. Press / to set the respective wake time. The time decrements or increments will follow by a faster rate when you press and hold the buttons. • The wake time, corresponding wake timer indicator (WK-1 for WAKE 1 and WK-2 for WAKE 2) and AM/ PM time indicator fl ash on the small display. 3. Slide the switch /WAKE1/ WAKE2/ on the top of the unit to position when fi nished. Selecting wake source You may choose to wake to radio or alarm sound. 1. Select an AM or FM station (see directions on “Radio”). 2. Set a wake time (see Setting Wake Time directions). 3. Press WAKE – OFF 1 or 2 repeatedly on the top of the unit to select a wake mode. • A corresponding icon lights on the large display. Turning off the wake alarm or radio • To silence the wake function momentarily: To turn off the wake function, press SNOOZE on the top of the unit. The wake alarm or radio will be switched off temporarily. The alarm or radio will be on again when the snooze period (default: 9 minutes) is over. (read “SmartSnoozeTM”) • To turn off the wake alarm or radio: Press OFF. The wake alarm or radio will activate again the next day unless you switch off the Wake function. • To disable the wake function completely: Press WAKE – OFF 1 or 2 repeatedly on the top of the unit until no wake mode icon (1 , 1 or 2 , 2 ) shows on the large display. 1 – Wake 1 by alarm 1 – Wake 1 by radio 2 – Wake 2 by alarm 2 – Wake 2 by radio • The unit is equipped with GRAD-U-WAKE. The alarm tone volume will increase gradually to its maximum in about 30 to 45 seconds. Checking wake time • Press CHECK WAKE TIME repeatedly to show the currently set wake time 1 and 2. • The wake time, corresponding wake timer indicator (WK-1 for WAKE 1 and WK-2 for WAKE 2) and AM/ PM time indicator show on the small display. • If corresponding wake function is not activated, OFF shows on the small display. Wake function SmartSnoozeTM This operation allows extra sleep time when the alarm sounds. The alarm will be silenced by pressing SNOOZE and VOL+/- until the snooze period is over. Snooze function can be used repeatedly up to 60 minutes. After this, the wake function will turn off until the next day. To set the “quiet” period with Snooze: 1. Press and hold SNOOZE in clock mode, radio mode, clock setting mode or alarm setting mode. 2. Press / to set the quiet period that shows on the large display. • The Snooze Period range can be from 1 to 30 minutes. (default: 9 minutes). 3. Release SNOOZE to save setting. In sleep mode, you can set the duration (up to 90 minutes) before the radio turn off automatically. To set the sleep mode: • Press SLEEP repeatedly to cycle among the sleep times available (90min, 60min, 30min, 15min and OFF. 90min is the default setting) on the large display. • The radio will be switched on. To check the remaining time in sleep mode: • Press and hold SLEEP to check the remaining sleep time on the large display. To cancel the sleep mode: • If you decide to turn off the unit sooner, press SNOOZE or OFF. Sleep function SmartSnoozeTM is only available when /WAKE1/WAKE2/ is at the lock position. Wake function Illustrations contained within this publication are for representation only and subject to change. The descriptions and characteristics given in this document are given as a general indication and not as a guarantee. In order to provide the hi...