Оценок - 3, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
Watch the PM Indicator AM/ PM time. 5. Press the Clock Adjust Button again or wait a few to normal mode. beeps will indicate that you have Setting and Operating Setting and Operating the Alarm This unit has two separate alarms, allowing you to set different wake times and alarm sounds. You can chose to wake to the radio, an alarm buzzer, or a selection of four soothing nature sounds. To set an alarm 1. Press the Alarm 1 Set Button until the current alarm time display flashes. 2. Turn the Smart Knob or press the Button or Button to set the desired time for Alarm 1. The Alarm 1 icon will appear on the display. Hold the Button or Button to advance the time forward or backward more quickly. Watch the PM Indicator icon at the right of the display correct AM/ PM alarm time. 3. Press the Sounds/Wake To Button to select the type of alarm sound you want to wake to: various nature sounds, buzzer or CD. 4. Press the Alarm 1 Set Button to confirm your alarm settings. Two beeps will indicate that you have finished setting Alarm 1. 5. To set Alarm 2, follow the steps above using the Alarm Set 2 Button. 6. When an alarm sounds, the associated alarm icon will flash. Press the Alarm Reset Button to stop the current alarm sound. The alarm will be automatically set to turn on at the same time the following day. If you do not want the alarm to turn on again the next day, press the Alarm On/Off Button once. The alarm icons will disappear, indicating that no alarms are on. Press the Alarm On/Off Button again to turn Alarm 1 back on, and again to turn Alarm 2 on, and once more to turn both Alarm 1 AND Alarm 2 on. 7. Alarms sound for roughly an hour. During this time, pressing the Snooze/Dimmer Bar will silence the alarm source for 9 minutes. Listening to a CD 1. Press the Open Button located on the top left of the unit. The CD door will open forward. 2. Place a CD on the spindle with the label facing towards you. 3. Close the CD door. 4. Press the CD Play/Pause Button to begin CD play. After ON is displayed briefly, a CD icon will appear on the display, along with the track number. The first track will play. 5. Adjust the volume by turning the Smart Knob. 6. To pause the CD, press the CD Play/Pause Button again. The CD icon will flash, indicating the current CD track is in pause mode. To resume play, press the CD Play/Pause Button. 7. To stop CD play, press the Alarm Reset/Power Off Button. CD Track Skip, Search and Repeat Functions 1. Press the Button to skip to the next track. 2. Press the Button to skip to the beginning of the current track. Press again to go to the beginning of the previous track. 3. Press and hold the Button or Button while a track is playing to search backwards or forwards rapidly through the track. 4. To Repeat a track, press the AM/FM/Play Mode Button. Repeat will flash on the display, indicating the current track will be repeated once. To repeat the entire CD, press the AM/FM/Play Mode Button again. The Repeat message will stop flashing, indicating the entire CD will repeat once. 5. To play the CD tracks in random order, press the AM/FM/Play Mode Button again. Random will appear in the display, indicating the CD tracks will play once through in random order. 6. To Repeat the random order play, press the AM/FM/Play Mode Button again. Repeat Random will appear, indicating that the CD will play twice through in random order. 7. Pressing the AM/FM/Play Mode Button again (the fifth button press) will cancel the repeat function. 7 Listening Note: Extend FM wire antenna fully Rotate for best AM 1. Press the Radio Button. After ON is displayed Radio will appear along with the current AM or FM radio and an AM 2. Press the AM/FM/Play Mode to select AM or FM 3. Press the Button or Button to tune the radio to the station. Press and hold the Button or Button to seek for the next clear 4. Adjust the volume by turning the Smart Knob. 5. To turn the radio off, press the Alarm Reset/Power Off Button. Setting Station Presets You can preset 12 stations (six AM, six FM) into 1. Press and hold a radio preset button when the desired station is tuned in. A single beep indicates the station has been entered. Repeat until you've stored all your stations. Listening to Nature Sounds This unit plays four different soothing sounds of nature. 1. Press the Sounds Button. After ON is displayed briefly, Nature will appear on the display, along with the number of the current nature sound. To change sounds, press the Sounds Button. 2. To turn the Nature Sounds off, press the Alarm Reset/Power Off Button. Listening to MP3/Line in Source 1. Connect a line-level audio source such as an MP3 player, &c, to the MP3 Line In Jack located on the rear right side of the unit using the cable provided. Press the MP3/Line In button to turn on the unit. Make sure to adjust the volume level on both this unit and the line-level unit to avoid sound or damage to speakers. Sleep Operation 1. While listening to any sound sourc...