Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
6. To switch off the radio set the FUNCTION SELECTOR (MODE) to OFF. TIME SETTTING Press and hold the TIME SET button and simultaneously press SLOW SET or FAST SET to skip to the correct time. Notes: Press SLOW SET button each time to skip one minute, press and hold the button to skip continuously. Press and hold FAST SET button to skip fast and continuously. ALARM SETTING Note: You can set two different alarm times on this unit. 1. Press and hold either the AL 1 or AL 2 button, then press the SLOW SET/FAST SET button to skip to the desired alarm time. 2. Set the FUNCTION SELECTOR (MODE) to AUTO. 3. Set the ALARM switch to AL 1 or AL 2 (for one alarm) or AL 1+2 (for two alarms), the corresponding indicator will illuminate. At the preset alarm time the alarm will set on the radio automatically. To pause the alarm and sleep another 9 minutes press the SNOOZE button. 4. To stop the alarm, slide the FUNCTION SELECTOR (MODE) to OFF or press AL OFF. SLEEP FUNCTION To switch off the radio automatically after 59 minutes slide the FUNCTION SELECTOR (MODE) to AUTO and press SLEEP. After 59 minutes the radio will switch off automatically. At the preset alarm time you will be woken by radio. SPECIFICATIONS Power supply 230V~ 50Hz (check the rated power on rating plate at the bottom of the device) Back-up 9V DC Power consumption 3W Operating temperature +5.C - +35.C Receiving Bands AM/FM Tuning Range AM: 525 - 1615kHz FM: 87.5 - 108MHz Speaker impedance 8. NET WEIGHT: 537g Specifications are subject to change without prior notice. 7. POWER SOURCE The unit operates with mains power supply. Clock and alarm with DC back-up, battery: 1 x 9V (not included). AC POWER SUPPLY Ensure that the AC power cord is in accordance with your local voltage cord and connect to mains power supply. Press the POWER button to turn on the unit. BACK-UP BATTERY Insert a 9V battery (not included) into the battery compartment located at the bottom; preferably use a long-life battery. In case of power failure when listening to the radio it will switch off and the display will show a wrong radio frequency, because the CPU cannot receive any signals from the radio. After the power failure the radio frequency will be restored to the last frequency and continue working. RADIO FUNCTION 1. Set the FUNCTION SELECTOR (MODE) to ON. 2. Select desired band with the BAND SELECTOR. 3. Rotate the TUNING control to find your desired radio station. 4. Adjust the VOLUME to a comfortable level. 5. For better reception extend the FM wire antenna to its full length when listening to FM or adjust the direction when receiving AM. 6. To switch off the radio set the FUNCTION SELECTOR (MODE) to OFF. TIME SETTTING Press and hold the TIME SET button and simultaneously press SLOW SET or FAST SET to skip to the correct time. Notes: Press SLOW SET button each time to skip one minute, press and hold the button to skip continuously. Press and hold FAST SET button to skip fast and continuously. ALARM SETTING Note: You can set two different alarm times on this unit. 1. Press and hold either the AL 1 or AL 2 button, then press the SLOW SET/FAST SET button to skip to the desired alarm time. 2. Set the FUNCTION SELECTOR (MODE) to AUTO. 3. Set the ALARM switch to AL 1 or AL 2 (for one alarm) or AL 1+2 (for two alarms), the corresponding indicator will illuminate. At the preset alarm time the alarm will set on the radio automatically. To pause the alarm and sleep another 9 minutes press the SNOOZE button. 4. To stop the alarm, slide the FUNCTION SELECTOR (MODE) to OFF or press AL OFF. SLEEP FUNCTION To switch off the radio automatically after 59 minutes slide the FUNCTION SELECTOR (MODE) to AUTO and press SLEEP. After 59 minutes the radio will switch off automatically. At the preset alarm time you will be woken by radio. SPECIFICATIONS Power supply 230V~ 50Hz (check the rated power on rating plate at the bottom of the device) Back-up 9V DC Power consumption 3W Operating temperature +5.C - +35.C Receiving Bands AM/FM Tuning Range AM: 525 - 1615kHz FM: 87.5 - 108MHz Speaker impedance 8. NET WEIGHT: 537g Specifications are subject to change without prior notice. 7. CAUTION: • READ INSTRUCTIONS - All the safety and operating instructions should be read before operating the unit. • RETAIN INSTRUCTIONS - The safety and operating instruction should be retained for future reference. • HEED WARNINGS - All warnings on the appliance and in the operating instructions should be adhered to. • FOLLOW INSTRUCTIONS - All operating instructions should be followed. • WATER AND MOISTURE - The appliance should not be used near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. • VENTILATION - The appliance should be situated so that its location or position does not interfere with its proper ventilation. For situated on bed, sofa, rug or similar surface that may block the ventilation openings, placed in a built-in installation, such as a bookcase or c...