Оценок - 3, средний балл: 3.7 ( )

Производитель: CFM Corporation Размер: 2.03 mb Название файла: Язык инструкции:

After 20 seconds of inactivity, a feature of the fireplace is for the LED visuals on the touchpad control panel to go out. You must activate the fireplace electronics by depressing any buttons on the remote control or the touchpad control panel for the LED visuals to reappear before any settings can be made or changed. Figure 10 Figure 11 3 3 B A 6 1 4 2 5 I/O I/O 4 7 1 FP1614 2 6 5 7 FP1614 VCEF touchpad FP1615 4/06 10009816 13 • Flame Speed Control Your fireplace features a flame speed that can be controlled either by remote control or at the touchpad control panel. By depressing button 1 once, the flame effect will be activated and turn on. By repeatedly depressing buttons 2 or 3, you can decrease or increase the flame effect speed to achieve the desired flame effect. Refer to the visual indicator A to monitor the relative speed of the flame effect between the slowest (lowest light bar) and fastest (highest light bar). For your added convenience, the flame effect speed setting is stored in memory when the flame effect is turned off. • Heater Control Your fireplace features a heater with a built-in thermostat and a variable temperature setting that can be controlled either by remote control or at the touchpad control panel. By depressing button 4 once, the heater will be activated and the LED visual indicator B lights up to indicate the temperature setting of the heater between the lowest (lowest light bar) and highest (highest light bar). To determine the room temperature, depress button 5 or 6 to decrease or increase until the heater goes off or comes on. The heater is designed to safely deliver the maximum amount of heat when it is turned on. To increase the room temperature, depress button 6 to increase room temperature setting. When the set temperature is reached, the heater will automatically cycle on and off to maintain the temperature setting for the room. It is suggested that you increase the temperature setting gradually to a room temperature that you are comfortable with. For your added convenience, the temperature setting is stored in memory when the heater is turned off. • Overhead Light Your fireplace features overhead lights that add warmth and glow to the refractories and logs. It is turned on or off either by remote control or at the touchpad control panel. Depressing button 7 switches the overhead lights on or off while the flame is on. If the flame is switched off, the overhead lights will go off but will come back on when the flame is switched back on. This feature is not available on the EF22. 14 10009816 10009816 15 EF22/26/33/36 Electric Fireplace 11 216mm [8 1/2"] (DISTANCE BETWEEN TWO SOCKETS} 305mm [12"] 216mm [8 1/2"] (DISTANCE BETWEEN TWO SOCKETS) 1 3 2 4 5 6 10 7 14 8 12 9 15 CFM Corporation reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. Ref. Description EF22 EF26/EF26FG EF33 EF36 1. Logset 10006656 10009234 10009235 10009236 2. Ember Lava Rock 10009800 10009801 10009238 10009239 3. Circuit Board 10009815 10009815 10009815 10009815 4. Refractory Right side 10010090 10010091 10010093 10010095 5. Refractory Left Side 10010090 10010091 10010092 10010094 6. DC Motor 10009621 10009621 10009621 10009621 7. Flame Generator Assembly 10003566 10003566 10003350 10003350 8. Glass Operable Door Assembly - Left -- 10009269 10009271 10009273 9. Glass Operable Door Assembly - Right -- 10009270 10009272 10009274 10. Socket w/Wire Assembly 10006453 10006453 10006454 10006454 11. Power Cord 10003095 10003095 10003095 10003095 12. Heater Fan Assembly 10006538 10006538 10006538 10006538 13. Screen Diffuser (not shown) 10007912 10007874 10006422 10006576 14. Transmitter 10009283 10009275 10009275 10009275 15. Fixed Glass 10008175 10008721 -- -- 1 YEAR WARRANTY For CFM Corporation Electric Fireplace BASIC WARRANTY: CFM Corporation (hereinafter referred to collectively as the "Company") warrants that your new electric fireplace is free from manufacturing and material defects for a period of one year from date of installation, subject to the following conditions and limitations. 1. This electric fireplace must be installed and operated at all times in accordance with the Installation and Operating instructions furnished with the product. Any alteration, willful abuse, accident, or misuse of the product shall nullify this warranty. 2. This warranty is non-transferrable, and is made to the original owner, provided that the purchase was made through an authorized supplier of the Company. 3. This warranty is limited to the repair or replacement of part(s) found to be defective in material or workmanship, provided that such part(s) have been subjected to normal conditions of use and service, after said defect is confirmed by the Company's inspection. 4. This warranty does not cover the lightbulb(s) included with the fireplace. 5. The Company may, at its discretion, fully discharge all obligations with respect...

Скачать инструкцию

Чтобы скачать, введите 2 цифры: