Оценок - 3, средний балл: 3.3
(
)
)
|
Фрагмент инструкции
Momentarily press the Monitor button again to return to normal operation. -10 FUNCTIONS Function Select (F) Button Pressing the Function button will allow selection of frequency channels, as well as selection of the various unit functions. Each press permits selection of the desired channel (1–14), FM mode on or off, beep tone, scan, VOX and Dual Watch functions. Pressing the Function button in the FM mode will allow FM frequency and FM preset selection. This button also activates the Key lock feature when pressed and held for more than 2 seconds. FM Frequency and Preset Memory Selection The transceiver is capable of receiving radio signals in the FM band, and is also equipped with nine preset FM memory locations. The presets allow the user to choose the nine most-used FM stations and store them for quick access. To enter the FM mode, press the function repeatedly until the FM icon blinks. Press the Up ( ) button and the FM icon becomes steady. The transceiver will receive the FM frequency displayed. To select an FM frequency while in the FM mode, press the function button. The FM radio frequency icon will start to blink. Press the Up ( ) or Down ( ) buttons until desired frequency is reached. Once the desired frequency is reached, press the PTT button once or the Function ( F ) select button twice. To exit the FM mode, press the Monitor (M) button and the transceiver returns to the FRS mode.To recall a preset FM frequency while in the FM mode, press the Function ( F ) button repeatedly until MEM display appears. Using the Up ( ) or Down ( ) buttons, select the desired memory preset ( 1 thru 9 ). To store an FM station press the function button until FM display flashes. Press Up ( ) or Down ( ) buttons to select desired FM station. Then press function (F) button until MEM display flashes. -11 Using Up ( ) or Down ( ) buttons, select desired memory position (1–9) for selected station frequency. Press and hold CALL button to lock station frequency into selected memory position. FM Auto Scan To automatically search for an FM station, press and hold the Up ( ) or Down ( ) button while the FM radio frequency display is blinking. When a strong FM frequency is encountered, scanning will stop and the FM display will blink. Once the desired frequency is reached, press the PTT button once or the Function ( F ) select button twice. This feature is useful in areas where reception of usual FM stations is poor, and local information is needed. Beep Confirmation Tones Whenever the Up/Down or Function (F) select button is pressed, the speaker will sound a beep tone to confirm each press, provided the key tone feature is enabled. The unit will also transmit a beep tone sequence after each transmission to signal the receiving party that transmission has ended. This tone is called a “Roger Beep”. To disable the key tones and “Roger Beep”, press Function button until the Beep Tone icon flashes. Then press Up ( ) or Down ( ) buttons until the icon disappears. No beep tones should be heard. To enable the key tones and “Roger Beep”, proceed as before, until the Beep Tone icon flashes. Then press Up ( ) or Down ( ) button. The key tone icon will remain displayed and a beep tone will be heard. Channel Scanning Press function button repeatedly until the SCAN icon flashes. Press the Up ( ) or Down ( ) button to enable the Scan function (the icon will appear steadily on the display). While in the Scan mode, the unit will pause on any active channel for 5 seconds, and then proceed to the next higher channel. The unit will scan channels 1–14 for activity and scanning will continue until the PTT button is pressed. -12 VOX Function This feature enables you to have hands-free conversation. When using the internal microphone/speaker or external microphone/ headset (purchased separately), your voice or the signal is detected and the radio transmits and receives automatically. To access the VOX function, press function (F) button repeatedly until VOX icon ( ) flashes. Press Up ( ) or Down ( ) button to enable VOX function (icon will appear steadily). Dual Watch Mode This feature allows monitoring of two channels simultaneously. To activate, press function (F) button repeatedly until the Dual Watch icon flashes in the display. Using the Up ( ) or Down ( ) buttons, choose the alternate channel number you wish to monitor for activity. Press the function (F) button to enter your selection. The channel display will now flash showing your current channel and alternate channel selection. To disable Dual Watch mode, press the function button until the Dual Watch icon flashes in the display. Then using the Up ( ) or Down ( ) buttons, select “0” as the channel number. When in Dual Watch mode, the unit will transmit on the channel on which it last received a signal. To transmit on the other channel you must exit the Dual Watch mode and select the desired channel. Key Lock This feature prevents accidental change of unit settings. While enabled, Key Lock ...