Оценок - 3, средний балл: 4
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
6. Push the PIP button to turn PIP screen On/Off. AUTO Menu Description AUTO When the ’AUTO’ button is pressed, the Auto Adjustment screen appears as shown in the animated screen on the center. Auto adjustment allows the monitor to self-adjust to the incoming video signal. The values of fine, coarse and position are adjusted automatically. (Available in analog mode only) To make the automatic adjustment function sharper, execute the ’AUTO’ function while the AUTO PATTERN is on. - If auto adjustment does not work properly, press AUTO button again to adjust picture with more accuracy. - If you change resolution in the control panel, auto function will be executed automatically. OSD Lock & Unlock Menu Description OSD Lock & Unlock After pushing the "MENU" button more than 5 seconds, OSD function is locked (unlocked). MagicBright. / Mode Digital(DVD)/Video/S-Video : ModeThe Monitor has four automatic picture settings that are preset at the factory. Then push button again to circle through available preconfigured modes. ( Dynamic > Standard > Movie > Custom ) Menu Description Play/Stop MagicBright. / Mode Analog/Digital(DVI) : MagicBright. MagicBright. is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Then push button again to circle through available preconfigured modes. ( Custom > Entertain > Internet > Text ) MagicBright. Mode Brightness Menu Description Brightness When OSD is not on the screen, push the button to adjust brightness. SOURCE Menu Description Selects the video signal while the OSD is off. (When the source button is pressed to change the input mode, a message appears in the upper left of the screen displaying the current mode -- SOURCE Analog, Digital, Video and S-Video input signal.) Note : If you select the Digital mode, you must connect your monitor to the graphic card’s or Digital DVD’s DVI port using the DVI cable. PIP Menu Description PIP Push the PIP button to turn PIP screen On/Off. Input Menu Description Play/Stop Source List Use to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. 1) Analog2) Digital3) Video4) S-Video Edit Name Name the input device connected to the input jacks to make your input source selection easier. 1) Analog2) Digital3) Video4) S-Video Picture (Analog / Digital : DVI) Play/Stop Contrast Brightness Coarse Fine Sharpness H-Position V-Position Menu MagicBright Custom Image Lock Auto Adjustment Description MagicBright. is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Text, Internet, Entertain and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing MagicBright [ ] button. You can use the on-screen menus to change the contrast and brightness according to personal preference. 1) Contrast : Adjust the Contrast. 2) Brightness : Adjust the Brightness. Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitter and shimmer. If satisfactory results are not obtained using the Fine adjustment, use the Coarse adjustment and then use Fine again. -Available in Analog Mode Only 1) Coarse : Removes noise such as vertical stripes. Coarse adjustment may move the screen image area. You may relocate it to the center using the Horizontal Control menu. 2) Fine : Removes noise such as horizontal stripes. If the noise persists even after Fine tuning, repeat it after adjusting the frequency (clock speed). 3) Sharpness : Adjust the Sharpness. 4) H-Position : Adjusts the screen location horizontally. 5) V-Position : Adjusts the screen location vertically. The values of Fine, Coarse, position are adjusted automatically. If you change resolution in the control panel, Auto function will be executed. -Available in Analog Mode Only Contrast Bightness Sharpness Color Tint PIP Picture You can adjust the PIP Screen Settings. 1) Contrast : Adjusts the Contrast of the PIP window on the screen. 2) Brightness : Adjusts the Brightness of the PIP window on the screen. 3) Sharpness : Adjusts the Sharpness of the PIP window on the screen 4) Color : Adjusts the Color of the PIP window on the screen 5) Tint : Adds a natural tone to the PIP window. Available : PIP ON Picture (Digital : Digital DVD) The Monitor has four automatic picture settings ("Dynamic", "Standard", "Movie" and "Custom") that are preset at the factory. You can activate either Dynamic, Standard, Movie, or Custom. You can select "Custom" which automatically recalls your personalized picture settings. 1) Dynamic 2) Standard 3) Movie 4) Custom You can use the on-screen menus to change the contrast and brightness according to personal preference. 1) Contrast : Adjust the Contrast. Contrast Brightness Menu Description Play/Stop Picture Mode 2) Brightness : Adjust the Brightness. 3) Sharpnes...