Select The SMP6100 allows programming of the the appropriate product. SP200/210 radio and enables you to: SP200 (American Version) 1. Program frequencies and built-in signalling SL100 (European Version) operations. 2. Customise radios to your own requirements. Select the appropriate band. and also provides access to a range of other Having selected a radio, the Setup & Select product features. Data Source Menu is displayed. Conventions Used Setup & Select Data Source In the following instructions, means 1. Select Communication Port press the Return key. On your keyboard, this 2. Read Radio may also be called the Enter Key or the 3. Set Path to Data Files Carriage Return Key. 4. Read Existing File 5. Restore / return to last file At any menu, returns you to the 6. Create New File previous menu. 7. Close 7.1.2 Getting Started Setting Rx / Tx Frequencies The following items are required to program the SP200/210 radio An 8 digit radio frequency field is displayed. The relevant frequency for Rx and Tx can be SMP6100 software (copied from the Launch entered. Press to enter values and Pack CD, or downloaded from Maxon’s follow instructions on screen. Press F1 for Website at maxon.co.uk) additional information. Press to return Programming cable (25-way D type to radio to main screen. aux. connector) Having entered the Rx frequency, and the To Run SMP6100 Channel spacing, the next screen relates to Tone options: Copy the SMP6100 executable file onto your hard drive. The following sub-menu is displayed: The software may be run from DOS via the hard drive, or within a Windows™ Select Tone Type environment. No change Ensure that SMP6100 is run in “full screen” No option mode. This can be achieved by pressing Select CTCSS tone at the same time or by clicking on the 4 arrowed box. Non-standard CTCSS tone #1 Non-standard CTCSS tone #2 Select DCS tone Note: It is recommended that a backup of the External option software diskette is taken. Maxon Europe permit and recommend that a copy be made This option allows CTCSS or DCS tone codes and stored in a safe place in case of to be programmed for each channel. When accidental damage or loss. CTCSS is programmed, only calls with the specified code will be heard. In normal operation, the radio will remain quiet until the correct code is received. The status indicator will glow green, the loudspeaker will open and the call will be heard. DCS works in exactly Issue 1.0 PROGRAMMING 03/01 Page 7-1 Maxon SP200/210 Radio SP200/210 the same way except that a digital burst is used instead of any audio tone. Select one of the tone options for receive operation and press Select Features Menu Having accessed the Personality Programmer Screen and entered your radio’s data, press the right arrow key to access the Select Features Menu. To disable power save mode, press when in RX delay time. (Selection of the left arrow key or will redisplay the previous menu.) Scanning: Press when scanning is highlighted, to select scanning option. Press for information on scanning routines. To change scanning parameters and scanning routines, follow instructions on screen. For “All channel scan”, no channel information needs to be entered since it will automatically scan all channels. For “Group scan” press to set up groups. To return to main menu press . To set up the scan “group” use the up and down arrow keys and press to enable group. To go to screen to allow entering of channels into the group press . To select the channel use the arrow keys and press . Only the channels numbers shown in black can be selected, since the channels in white have no frequency information. To return to main menu press . N.B To allow user entry of scan groups (via the keypad), it is necessary to select group scan with an empty group enabled. Using All Channel Scan prevents editing by the user. Program/Print/Save Program/Print/Save Program Radio Print Data Save Data to Disk Change Data Program Radio On selection of option 1, the following sub- window is displayed: SWITCH OFF RADIO TO EXIT PROGRAMMING OR PRESS ANY KEY Please ensure radio is connected to computer and switched OFF $$$ Please hold down the monitor button then switch on radio Please release monitor button after ‘uu’. Follow the instructions displayed in the screen window. Once the monitor button has been released after the second LED flash, the following sub-window is displayed: SWITCH OFF RADIO TO EXIT PROGRAMMING If problems occur while programming, turn the radio off to return to a menu. Verify that your radio is a model [radio model number] Interrupts are disabled for programming The radio’s light MUST be green Please press then release monitor button. Programming: Writing ‘Word’ If problems occur during programming, check you have specified: - the correct communication port - the programming leads are all connected - the radio is fitted with ...
)
