|
Фрагмент инструкции
rough, rustic tiles). Therefore, you must check the underside of the floor tool at regular intervals. Worn undersides of floor tools may have sharp edges that can damage sensitive hard floors, such as parquet or linoleum. The manufacturer does not accept any responsibility for damage caused by worn floor tools. Turbo brush If your appliance is equipped with a turbo brush, please consult the accompanying instruction manual for notes on its use and maintenance. Other accessories that you do not need can be stored easily in the accessories compartment of the appliance lid. Figure 10 When the opening button is pressed, the lid of the accessories compartment opens automatically. Take out the required accessories. Figure 11 After removal, close the lid of the accessories compartment and engage the catch. Vacuuming with accessories (attach to handle or suction pipe as required) a)Crevice nozzle For cleaning crevices and corners b)Upholstery nozzle For cleaning upholstered furniture, curtains, etc. c)Hard furnishings brush For vacuuming picture frames, books, furniture requiring particular care, etc. Hard-floor brush Figure 13* For vacuuming hard floor coverings (tiles, parquet flooring, etc.) Push the telescopic tube into the connecting piece of the hard-floor brush until it engages. Press on the unlatching sleeve and pull out the telescopic tube to disconnect. Figure 14* For vacuuming hard floor coverings (tiles, parquet flooring, etc.) Cleaning the hard-floor brush Figure a)Vacuum from below to clean the brush. b)Cut through threads and hairs wound round the 15* rollers using scissors. Vacuum threads and hairs with the crevice nozzle. Figure 16 Once you have switched off the vacuum cleaner, you can use the parking aid on the back of the vacuum cleaner if you wish to stop vacuuming for a short time. To do this, slide the catch on the floor tool into the groove on the back of the vacuum cleaner. Figure 17 The appliance can also be carried using the carrying handle when vacuuming stairs, for example. When the work is done Figure 18 Unplug the vacuum cleaner. . Briefly pull the power cord and release. The cord rewinds automatically. Figure 19 To store or transport the vacuum cleaner, use the storage aid on the underside of the vacuum cleaner. Stand the vacuum cleaner up on its end. Slide the catch on the floor tool into the groove on the underside of the appliance. *Dependent on model en Changing the bag Replacing the bag Figure If the bag change indicator is permanently lit when the floor tool is lifted from the floor and the highest suction setting is selected, the filter bag must be replaced even if it is still not full. In this case it is essential to change the bag due to the type of dust which has been vacuumed. First check that the nozzle, suction pipe and flexible hose are not blocked, as this would also lead to the bag change indicator being triggered. 20 Figure 21 . When the opening button is pressed, the appliance lid is raised slightly. . Rea...
Эта инструкция также подходит к моделям:Пылесосы - VSZ61222/01 (9.65 mb)
Пылесосы - VSZ61244/01 (9.65 mb)
Пылесосы - VSZ61245GB/01 (9.65 mb)
Пылесосы - VSZ61245GB/04 (9.65 mb)