Войти:
Оценок - 4, средний балл: 3.5 ( )

Инструкция по эксплуатации Samsung, модель SR8896

Производитель: Samsung
Размер: 82.54 mb
Название файла:
Язык инструкции:itenfrdenl
Перейти к скачиванию



К этому устройству также есть другие инструкции:

Фрагмент инструкции


It can be used to clean bread or cookie crumbs. 3. Max Mode : Runs until the battery is nearly depleted. 4. Manual Mode : You can clean the floor manually by moving the cleaning robot. 5. Turbo Mode : Since the power brush rotates at maximum speed in this mode, the product will clean more effectively.(You can switch the mode with the remote control.) 6. Edge Mode : When the Obstacle Sensor detects an obstacle during the cleaning, the Robot Cleaner reduces its speed to minimize the bumping impact and the Bumper Sensor also helps it lower the bumping impact. And, it cleans the corners by reaching to them as close as possible. 7. Scheduled Cleaning Mode : At the specified time, the cleaning robot cleans the floor. 8. Daily Cleaning Mode : The cleaning robot cleans the floor everyday at the specified time. EASY DUST OUTLET_ The dust output at the top enables emptying the dust bin easily using a normal vacuum cleaner without dust flying around. Product Features 13 roduct Features AUTO CHARGING When the battery is low, the robotic vacuum cleaner is automatically guided to the charger to enable it to perform a quick auto charge. EDGE-CLEANING SIDE ROTATING BRUSH The edge-cleaning side rotating brush cleans dust from the edges. DOORSILL CROSSING _ The robotic vacuum cleaner's innovative driving system makes it possible for it to cross over doorsills with a height of about 1.5cm and clean all rooms. The robotic vacuum cleaner may not be able to pass a 1.5cm doorsill depending on the shape of the doorsill. The robotic vacuum cleaner detects and avoids obstacles in 2 stages. First, the 8 obstacle sensors detect obstacles in stage 1 and if the robotic vacuum cleaner does crash into an obstacle, the 2 bumper sensors absorb the impact. About 1.5cm Stair type I Vertical type r'iojH it fool ANTI-CRASH ANTI-FALLING _ The 3 Cliff sensors detect downward steps such as stairs or the front door threshold to prevent robotic vacuum cleaner from falling down stairs. SAFETY DEVICE When the robotic vacuum cleaner is lifted up while cleaning, the driving wheels, power brush, suction motor, and side rotating brush are stopped autonati(all) by sensor. 14_ Product Features ssemblina the cleaner COMPONENTS ■ Others Components (AAA-Type Batteries) SP User Manual / 2 Battery VIRTUALGUARD Remote Control Cradle Microfiber Mop <*<> / Spare Filter Cleaning Brush Assembling the cleaner _15 02 ASSEMBLING THE CLEANER ssemblina the cleaner NAME OF EACH PART Dust Outlet -Operating Button - Camera Obstacle Sensor - Dust Bin Eject Button Dust Bin Dust Outlet [ Main unit ] Front Display Panel VIRTUAL GUARD Sensor Remote Control Sensor Obstacle Sensor Bumper Sensor Remote Control Sensor 16_ Assembling the cleaner ssemblina the cleaner NAME OF EACH PART [ VIRTUAL GUARD ] Mode Lamp Distance Detection Sensor Mode/Power Button Main Body Detection Sensor ■ Installing the batteries Batteries are not supplied with the product. You have to purchase the batteries separately. Install the alkaline batteries (type D) before use. Install the batteries into the VIRTUAL GUARD as shown by the figure below. (If the batteries are installed with the incorrect polarity, the VIRTUAL GUARD will not work.) After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place. * Specification: Alkaline Type D (LR20) batteries Assembling the cleaner _17 02 ASSEMBLING THE CLEANER ssemblina the cleaner NAME OF EACH PART [ Remote Control ] ■ Installing the Remote Control Batterise Batteries are not installed in the remote control when purchasing the product. Install the batteries (type AAA) before use. Lift the battery compartment cover at the back of the remote control, while pressing the locking tab. Install the batteries into the remote control as shown by the figure below. (If the batteries are installed with the wrong polarity, the remote control will not work.) After inserting the tip of the cover into the slot, push the other end to close it until it clicks into place. * Specification: AAA type batteries 18_ Assembling the cleaner ssemblina the cleaner NAME OF EACH PART DISPLAY PART_ 1. Number Display - Shows the timer display, progress status, and error codes using numbers, letters and graphics. 2. Battery Level Indicator - Charging : Shows the charging progress in 3 steps. - In Use : Shows the battery charge level. The battery charge level is reduced by each level from FULL while operating. (When the battery is fully discharged, one level will flash to display "LO".) 3. Scheduled Cleaning - When cleaning is scheduled, the Scheduled Cleaning icon is lit. 4. Daily - When daily cleaning is scheduled, the Daily icon is lit. 5. Recharging - This icon turns on when the cleaning robot returns to the charger station to charge its battery. 6. Cleaning Mode Display - Each time the Cleaning Mode button is pressed, the corresponding cleaning mode is di...

Эта инструкция также подходит к моделям:
Пылесосы - SR8898 (82.54 mb)

Напишите ваш отзыв об устройстве



Текст отзыва
Ваше имя:
Введите две цифры:
capcha





Категории