Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
It is also the cord rewind button that can be used to rewind the power cord. 3 4 NOTE : ON/OFF switch is combined with POWER CONTROLLER - To start or stop the unit just lightly press it downward. ON/OFF SWITCH With the cord plugged into an electrical outlet, start or stop the vacuum cleaner by pushing lightly downward on the switch. NOTE : If the “Dust-Full” indicator continues to display “RED” even after changing the dust bag, turn the cleaner off and check whether the hose, tube or nozzle is clogged. DUST-FULL INDICATOR If the “Dust-Full” indicator changes to “RED” while you are cleaning, the dust bag requires replacement. POWER CONTROL(VARIABLE CONTROL TYPE ONLY) MIN MAX MIN MAX The vacuuming power can be adjusted to suit any situation with the electrical power control. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. -To adjust power output just turn it right or left. USING THE ACCESSORIES CREVICE DUSTING Crevice tool for radiators, crevices, corners, between cushions. Dusting brush for furniture, shelves, books, etc. • Before use, assemble the dusting brush to the crevice tool TOOL STORAGE Your cleaner features a tool storage device. Assemble the accessory hanger on to the extension tube. It can be used to store the cleaning tools while they are not in use. This tool can be separated into two parts. USING & ASSEMBLING THE STRAP This appliance is designed to be conveniently carried on your waist using the belt-strap accessory. When cleaning steps, curtains, shelves, etc, you can carry the unit with the strap over your shoulder. Ready for use 1) Insert the lockers into the holes on the cleaner, taking care of the lockers’ direction. *Strap-ends should face the body of the cleaner. 2) Pull the lockers to the front of the cleaner until they click into place. 3) Adjust the strap length to fit your body. A TYPE B TYPE 1 Locker * 2 3 2 3 When not using the strap -Detach the lockers by pushing them down and drawing them out from the unit. -Keep the strap separately for the next time you want to use it. A TYPE B TYPE 5 6 MAINTENANCE OR REPLACEMENT OF THE FILTERS SECONDARY FILTER SECONDARY FILTER REPLACING THE DUST BAG INLET FILTER To protect the motor, your cleaner features a secondary filter at the front of the motor in the dust compartment. Do not allow the filter to become clogged. Suction power reduction or motor damage may result. After cleaning the secondary filter attach it in place. TRANSPORTING AND STORING THE VACUUM CLEANER Located on the top rear side of the vacuum-cleaner, there is a nozzle support that can be used to park the nozzle during pauses in cleaning. For easy storage and transportation, this vacuum cleaner has a clip system built onto the body, which will keep the tube, hose and nozzle in a vertical position. PARK POSITION 1) To open the dust cover of the dust bag compartment, press the clamper upwards. (The clamper is located at the front of the dust cover) 2) Remove the dust bag...
Эта инструкция также подходит к моделям:Пылесосы - VC-5913V (527.67 kb)
Пылесосы - VC-5914 (527.67 kb)
Пылесосы - VC-5914V (527.67 kb)
Пылесосы - VC-5915V (527.67 kb)