Оценок - 3, средний балл: 3.7
(
)
)
|
Фрагмент инструкции
2. Vacuum cleaner MIN/MID Press the MIN/MID button to operate the vacuum at a low level (for curtain cleaning, etc.). Press again to operate the vacuum in a MID mode. 3. Using at MAX Press the MAX button to operate the vacuum at maximum intake. Press the power control button repeatedly to select the correct mode. (ON(MIN) > MID > MAX > OFF) NOTE : If the remote handle control is not working, the cleaner can be operated using the control button on the body of the machine. EN-3 2-4 HOW TO USE AND MAINTAIN THE ACCESSORIES To reduce suction for cleaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open. MIN = For delicate surface e.g. net curtains. MAX = For hard floors and heavily soiled carpets. 2) BODY-CONTROL TYPE - HOSE - BODY Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. PIPE ACCESSORY Push the accessory on to the end of the hose handle. Pull out and turn the dusting brush for cleaning delicate areas. To use the upholstery tool, push the accessory on to the end of the hose handle in the opposite direction. ELBOW EXTENDING TUBE (OPTION) 1. Connect the elbow extending tube to connecting part for hose knob and telescopic pipe. 2. Fit the telescopic pipe to the lower part of the elbow extending tube. 3. Press the PUSH button. 4. With the PUSH button pressed, the elbow extending tube is folded. 5. Using the elbow extending tube allows hard to reach areas (e.g. under furniture)to be cleaned without having to kneel down. 1 2 3 4 5 Features may vary according to model. Ў EN-4 For improved pickup of pet hair and fibre on carpets OPTION 1 2 3 4 Remove dust inside the brush housing using a dry duster or crevice tool. 5 Insert brushbar into rotating belt and assemble. 6 Click the transparent screen cover back into place to reassemble. Push the Open button of the transparent screen cover to separate the cover. Remove the brushbar from the transparent screen. Remove waste matter such as dust and hair tangled around the brushbar using scissors. Frequent vacuuming of hair or pet fur may cause a falling-off of the rotation due to matters tangled around the drum. In this case, clean the drum with care. Remove waste matter completely if the Adjust the inlet lever according to the inlet is blocked. floor surface. OPTION ....Carpet Cleaning ....Floor Cleaning Vacuum dust in wide area at once OPTION Remove waste matter completely if the inlet is blocked. For picking up pet hair and fibre on upholstery and bed linen. Remove waste matter completely when inlet is blocked. Turn the lock button to ‘UNLOCK’, and remove waste matter. Turbine Brush To reassemble, align the cover to the front of the main body and close. After closing the cover, ensure that the lock button is turned to the ‘LOCK’ position. Warning ...
Эта инструкция также подходит к моделям:Пылесосы - SC8410 (6.69 mb)
Пылесосы - SC8430 (6.69 mb)
Пылесосы - SC8460 (6.69 mb)
Пылесосы - SC8470 (6.69 mb)