Оценок - 4, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
Do not stand on the hose assembly. Do not put weight on the hose. Do not block the suction or the exhaust port. • Switch the vacuum cleaner off on the body of the machine before unplugging from the electrical outlet. Disconnect the plug from the electrical outlet before changing the dust bag or dust container. To avoid damage, please remove the plug by grasping the plug itself, not by pulling on the cord. • This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance. • The plug must be removed from the socket outlet before cleaning or maintaining the appliance. • The use of an extension cord is not recommended. • If your vacuum cleaner is not operating correctly, switch off the power supply and consult an authorized service agent. • If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard. • Don't carry the vacuum cleaner by holding the hose. Use the handle on the vacuum cleaner set. • Unplug the cleaner when not in use. Turn off the power switch before unplugging. safety information _03 contents ASSEMBLING THE CLEANER 05 Assembling the cleaner 05 OPERATING THE CLEANER 06 Power cord 06 On/off switch 07 Power control UD MAINTAIN TOOLS AND FILTER 09 09 Using accessory 11 Maintain floor tools 13 Check filter indicator 13 Changing the dust bag 14 Cleaning inlet filter 14 Cleaning outlet filter 14 Change the battery (Optional) TROUBLESHOOTING 15 04_ contents assembling the cleaner assembling the cleaner option QP • Features may vary according to model. Refer to 5,6 page. • For storage, park the floor nozzle. assembling the cleaner _05 01 assembling the cleaner operating the cleaner A • When removing the plug from the electrical outlet, grasp the plug, not caution the cord. on/off switch 06_ operating the cleaner power control Body-control type (Optional)_ - HOSE To reduce suction for leaning draperies, small rugs, and other light fabrics, pull the tap air until the hole is open. - BODY (VOLUME TYPE ONLY) To control power level, just slide the power control bottom right and left. MIN = For delicate fabrics, e.g.net curtains. MAX = For hard floors and heavily soiled carpets. - USING THE BLOWER Located on the left rear side of the cleaner. 1) Disconnect the hose from the body of the cleaner. 2) Connect the hose clamper to the blow hole. operating the cleaner _07 02 operating the cleaner operating the cleaner Remote-control type (Optional) - HOSE 1. Vacuum cleaner ON/OFF Press the ON/OFF button to operate the vacuum cleaner. Press again to stop the vacuum cleaner. 2. Vacuum cleaner MIN/MID Press the MIN/MID button to operate the vacuum at a low level (for curtain cleaning, etc.). Press again to operate the vacuum in a MID mode. 3. Using at MAX Press the MAX button to operate the vacuum at maximum intake. - BODY Press the power ON/OFF button repeatedly to start and to stop the vacuum cleaner. (OFF^ON^OFF) If the remote handle control is not working, the cleaner can be operated using the ON/OFF button on the body of the machine. ffi The ON/OFF button operates the vacuum cleanner or stops it. ■ The INFRARED light indicates the part that receives the infra-red signal from the handle control. 08_ operating the cleaner maintain tools and fiter USING ACCESSORY Accessory (Optional)_ • Crevice tool for radiators, crevices, corners, between cushions. • Dusting brush for furniture. shelves, books, etc. • Upholstery brush - for cushions and drapery. • Crevice tool for radiators, crevices, corner, between cushions. • Dusting brush for furniture, shelves, books, etc. Use rotating brush action for small areas such as stairs and upholstery. fW\ Press gently when using rotating brush to gain maximum cleaning. Too much pressure could cause the brush to stop rotating. maintain tools and filter _09 03 MAINTAIN TOOLS AND FILTER maintain tools and fiter Pipe Adjust the length of the telescopic pipe by sliding the length control button located in the center of the telescopic pipe back and forth. • To check for blockages, separate the telescopic pipe and adjust to shorten. This allows for easier removal of waste clogging the tube. Cleaning the cyclone filter (Optional) (j^| • It is necessary to use Cyclone Filter while cleaning. 10_ maintain tools and filter MAINTAIN FLOOR TOOLS 2-Step Brush (Optional)_ • Adjust the inlet lever according to the floor surface. • Remove waste matter completely if the inlet is blocked. maintain tools and filter _11 03 MAINTAIN TOOLS AND FILTER maintain tools and fiter Mini turbo brush (Optional) - TO REPLACE...
Эта инструкция также подходит к моделям:Пылесосы - QUEEN-2100 (6.03 mb)