Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
Put them in like this. Remember to replace the batteries at least once a year. Don't leave the batteries out for longer than one hour, otherwise you will need to set the remote up again. GETTING STARTED This remote is ready to work with any Philips TV or VCR. For other brands of equipment, it needs to be set up first. That only takes a couple of seconds, thanks to Philips' Simple System Setup! Before you start, make sure you're in the right mode for the equipment you're setting up (TV or VCR). The green indicator LEDs show which mode is selected. To switch between modes, press once to activate, then press it again to advance to the next mode. Also, make sure the equipment is switched on. Sit right in front of it. If you know the brand of your equipment, look at the code list at the back of this booklet, and find the first 3-digit code for your equipment. 1 Press and hold 1 and 3 at the same time until the green LED lights up. (Release the keys, the green LED should stay on) 2 Enter the 3-digit code using the keypad. The green LED blinks twice. That's it! Now, press a few keys on the remote to check that the equipment responds correctly. If it doesn't, try again using the next code in the list. In the rare instance that none of the codes work, follow the instructions in the next section. Tip: Make a note of the code inside the battery case, and in the back of this booklet in case you ever need to setup again. If you don't know the brand of your equipment or if you can not find it in the codelist, setup still won't take long. Philips' patented Handsfree autosearch tests all the codes one after another and finds the right one for you! The search time averages about 90 seconds. (Maximum search time is 5 minutes for TV; 2 minutes for VCR) Make sure the TV, VCR etc. is switched on. If it's a VCR, insert a tape and start playback. You will know when the correct code has been found because the equipment will switch off or the VCR will stop playback. 1 Press and hold 1 and 3 at the same time until the green LED lights up. 2 Press to start the search. Each time the green LED blinks, another code is sent. When the right code is found, the equipment switches off (the VCR will stop playing). 3 English 3 Immediately press to stop the search. If you missed the correct code because the search went too far, switch the equipment back on, then press P (down) to send the previous code again. Press (down) repeatedly until the equipment switches off again. P 4 Once you've found the correct code, press to lock it in memory. The green LED blinks twice. That's it! Now, switch the equipment manually on again, then press a few keys on the remote to check that the equipment responds correctly. In the rare instance that it doesn't, try again from step 1 to find a better code. Note that code! To save time if you ever need to setup again, make a note of the correct code inside the battery case and in the back of this booklet. In case you have forgotten to note the code you can still 'read out' the code from the remote. Here's how: 1 Make sure you've selected the right mode (with 1 6 ). Then press and release and 1 at the same time; the green LED lights up. 2 Press . The green LED goes out. 3 Press and count the number of times the green LED blinks. This is the first digit of the 3-digit code. (No blinks means the digit is zero.) Press 3 2 and count the number of blinks for the second digit. Press and count the number of blinks for the third digit. 4 English NEED HELP? If you have questions about your remote or if you are missing certain functions on your remote, call our free-phone helpline! Before you call, please read the manual carefully. Most questions will clear themselves. If you don't find an answer to your questions, make a note of your equipment in the table below - this makes it easier for the operators to help you quickly. Look for model numbers in the equipment instruction manual, or on the back of the equipment. Be in front of the equipment, this way our operators can help you verify the functionality of your remote. In the UK. call 0800 968 118. In Ireland, call 1 800 553 136. The model number of your Philips universal remote control is: SBC RU422 Date of purchase: ____/____/____ Day/month/year Equipment Brand Model nr. Used code TV VCR As you add new components to your home entertainment system, Philips again offers a universal remote control that will fit your new needs. Look for below unique full range of universal remote controls from Philips at a retailer near you. RU 110 : Universal easy TV zapper RU 410 : 1 in 1 Universal TV Remote with digits and TXT RU 430 : 3 in 1 Universal Remote Control for TV, VCR and SAT/Cable RU 440 : 4 in 1 Universal Remote Control for TV, VCR, SAT/Cable and AUX for audio RU 455 : 4 in 1 Universal Remote Control for TV, VCR, SAT/Cable and AUX for second device RU 460 : 6 in 1 Universal Remote Control- Pre-programmed and Learnable Another very nice product from Philips is the Philips SBC LI51...
Эта инструкция также подходит к моделям:Пульт ду - SBCRU422/85U (518.76 kb)