AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. All rights reserved. Printed in China. 850003047 Issue 1AT&T 5/00 1 PARTS CHECKLIST Remember to save your sales receipt in case you ever need warranty service, and make sure this telephone package includes the items shown below: TELEPHONE BASE Table Model TELEPHONE BASE Wall Model Coiled handset cord Telephone line cord TELEPHONE HANDSET Receiver volume

Before using this AT&T product, please read the Important product information on pages 50-51 of this user’s manual. Please thoroughly read the user’s manual for all the feature operation and troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at or call 1 (800) 222-3111. In Canada, dial 1 (866) 288-4268. © 2007 Advanced American Telephones. All rights reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property II, L.

• Only Line 4 can be a private line. Select PRIVATE LINE in the LINE GROUP menu on that telephone (see the LINE GROUP section on page 43). Continued on next page 2 Planning your system Continued from previous page • All extensions that share the same line should share the same line group number (4-15). • You can connect fax machines or other non-system devices to AUXL3 or AUXL4 on the back of the telephone (also called data ports), so they can access line 3 or 4. • See Optional spare battery, pa

The outside call will automatically be put on hold, and you will see INTERCOM TO XX, with XX being the destination extension number. 2. Press the one-touch button for the extension to which you’re transferring the call. -OR- Dial the extension number to which you’re transferring the call. You will see the extension number in the third line of the display. 3. When the other party answers by pressing [INTERCOM], you can announce the call. 4. Press [TRANSFER]. 5. Hang up. NOTE: If you do not dial a

Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. 91-5783-10-00_ATT1487_R0.qxd 6/2/2003 12:14 PM Page 1 User Manual (Part 2) 2.4 GHz Corded/Cordless Telephone/Answering System 1487/1187 with Caller ID & Call Waiting Table of contents Getting Started QUICK REFERENCE ..............................2 Parts checklist.......................................4 Before you begin .............

All rights reserved. Printed in Mexico. 848234050 Issue 1AT&T AT&T 135 Quark pdf 7/22/98 11:26 AM Page 2 PA RTS CHECKLIST Remember to save your sales receipt in case you ever need warranty service, and make sure this telephone package includes the items shown below: 7-foot line cord 5-inch line cord Coiled handset cord T e l e p h o n e B a s e H a n d s e t R i n g e r V o l u m e Dial Mode S w i t c h 1 AT&T 135 Quark pdf 7/22/98 11:26 AM Page 3 I N S TA L L AT I O N Dial Mode Switch Selection

licensed to Advanced American Telephones. © 2000 Advanced American Telephones. All rights reserved. Printed in China. 850003054 Issue 1AT&T 6/00 INSTALLATION Programs a number in memory RINGEROFFLOHI TONE PULSE 1 2 34 5 67 ABC DEF GHI JKL MNO PQRS TUV WXYZ TONE OPER MEMORYPROGRAMFLASH REDIAL 8 90 # Dial Mode switch Temporary Handset Redials last call made Accesses numbers stored in memory Receiver Volume (on left side of base) Ringer Volume Accesses custom calling services Tone Dial Mode This te

Or write to: AT&T Customer Information Center P.O. Box 19901 Indianapolis, IN 46219 Order: Document Number 999-500-246 i INTRODUCTION TO THE AT&T PagePac® 6 VOICE PAGING SYSTEM AT&T PagePac 6 is a compact, powerful, voice-paging system that integrates single-zone paging capability into your telephone system. PagPac 6 can be used with most AT&T telephone systems, from single-line residential systems to modern electronic key and PBX systems. Front Rear PagePac® 6 Voice Paging System FEATURES Conne

Part 2 © 1998 Lucent Technologies Consumer Products L.P. All rights reserved. Printed in Mexico. 848229571 Issue 2AT&T INSTALLATION Battery Installation (optional) RING SELECT POWER Telephone Line Cord FOR TABLE/DESK INSTALLATION 1 Install the batteries (optional). • Turn the unit upside down. • Push in on the two tabs at the large end of the base, and lift the base off the unit. • Push in on the two tabs on the battery compartment door, and remove it. • Insert four AA batteries. Always use four

Please also read Part 1 – Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2001 Advanced American Telephones. All rights reserved. Printed in China. Issue 1AT&T 05/01 INSTALLATION Before You Install Batteries Choose a location for the answering system near a modular telephone jack and a standard electrical outlet not controlled by a wall switch. Use only the power cord supplied with this product. If you n