Press TMSG soft key to begin text messaging. 2. Dial the 2 digit number for the desired message. 3. Confirm this is the intended message then press SEND. 4. Wait for a reply from the other station (steps 1, 2 & 3) 5. When any station presses EXIT the displays at both stations return to their previous call progress condition. At all times after step 1 you can talk and listen to your caller while repeating steps 2. The example on page how to Text Messaging. In to station 205 message. STATION 201:

• Dust the unit regularly. Wipe the unit with a soft, damp cloth. Do not use detergents and avoid excess moisture. • The Clarity W1000 is an electrical device. Avoid electric shock by keeping the phone away from water. (i.e.: bathroom, kitchen sink, etc.) 19 TROUBLESHOOTING GUIDE . Phone Will Not Operate Disconnect any other equipment that may be attached to the phone. Check your phone cords and connections. Try a different line cord and/or handset cord to determine if the problem is with one of

4289 Bonny Oaks Drive Chattanooga, TN 37406 E-Mail: claritycs@plantronics.com Web: Voice: 1-866-5-CLARITY (1-866-525-2748) PM010705•C510•Rev E E N G L I S H C510 Owners Manual E S P A N O L F R A N C A I S Clarity® 510 Corded Telephone with Caller ID Featuring Clarity® PowerTM Technology E N G L I S H C510 Owners Manual E S P A N O L F R A N C A I S Clarity® 510 Corded Telephone with Caller ID Featuring Clarity® PowerTM Technology Table Of Contents Safety Instructions............................

The Ringer Equivalence Number is an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on an interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does not exceed five. (The term “IC:” before the certification/registration number only signifies that the Industry Canada technical specifications were met.) The party responsible for regulatory

Phone numbers cannot be deleted while it is in the flashing mode. Deleting All Caller ID Information 1. While reviewing the Caller ID, hold down DEL for three (3) seconds. The display flashes “ERASE ALL?” 2. Press DEL to select. The display briefly reads “ALL CID” and “ERASED” and then “— NO CALLS —”. At any time, you can press FLASH one time to return to standby mode. Or it will return to standby automatically when 30 seconds has elapsed without any keys being pressed. Call Waiting When you are

Select one of the main categories: CALL, OTHER or ANS ( ANSWER). Press the SCROLL key to display additional options available under each of the three main categories. The symbol . displayed as the last character on the lower line of the display indicates that there are additional options. Press the SCROLL key to display these additional options. User instructions will be displayed in lower case letters. Options assigned to soft keys will be in upper case letters. DIRECTORY INFORMATION An 11 char

• Press the HOLD key. • Press the TRSF key. PERSONAL SPEED DIAL NAMES Each personal speed dial number can have an 11 character name assigned to it. This name is used to select the speed dial bin when you are dialing by directory. • Press TRSF and then dial 106. • Dial the speed 00– 49. • Write your message Alarm Reminder Messages. • Press the TRSF key to store the speed dial • Repeat for each speed dial bin if STATION NAMES You can assign an 11 character name to your keyset. This allows other di

Access Procedure: 1. Dial your phone number 2. Wait for the Answering Machine to pick up and issue the tone. Enter the security code. The DEFAULT CODE is 1 2 3. (The security code can be changed by the user. See section Security ID on page 39) 3. The menu will announce the following: Press Two to Play Messages, Press Two again to Stop Press Zero while playing a Message to Erase Press One to Review Press Three to Skip Press Four to Turn OFF/ON Press Seven to Review Menu Again Bypass the Outgoing

Industry Canada Technical Specifications This product meets the applicable Industry Canada technical specifications. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an acceptable method of connection. In some cases, the company’s inside wiring associated with a single line individual service may be extended by means of a certified connector assembly (

(During a call): Press this button to mute a call; press again to unmute call. (Calls List/Phonebook entry): Press this button to delete the entry. (End)/BacK button: Press to end a call. (Menu Mode): Press to move back a menu level. #/pause/aBc/Format button: (Idle/Pre-dial/During a call mode): Press to insert a # symbol. (In number editing mode): Press once to insert the # symbol; press and hold # key to insert a pause. (In name editing mode): Toggle between ABC/Abc/abc (In calls list entry):