Оценок - 0, средний балл: 5
(
)
)
|
Фрагмент инструкции
Check the battery icon on the LCD to see the battery charge level. When replacing the batteries, always use good quality Ni-MH AAA re-chargeable batteries. Charging the Handset 1. Place the handset into the base. The LCD screen will light up and you will hear a beep to indicate charging has begun. 2. Important: Before initial operation, you should fully charge the handset for at least 15 hours. 3. After the batteries are fully charged, begin the registration process as described on page 9. When battery power is very low and you place the handset on the base, the display will show . Check the battery icon on the LCD to see the battery charge level. Using the Handset Carrying Clip You may choose to use the optional belt clip provided with your handset. 1. To attach, slide the belt clip down onto the grooves. Press the tabs on the belt clip into the slots to attach. 2. To remove, insert a screwdriver along the edge of one of its “arms” and release the clip and then lift it off. Screen Navigation If you press under the word Back on the screen from any menu, the phone returns to the previous screen. To return to the main screen at any time, press . The phone will automatically return to the main screen from any menu if no key is pressed for 30 seconds. “Standby” can mean that you are at the main screen or can also mean that you are not on a live call and do not have dial tone engaged. To Access a MENU Option 1. Press under the word Menu on the screen to display the main menu list. 2. To scroll through menu options, press or repeatedly. The menu item that is currently selected will be highlighted. 3. When the desired menu item is highlighted, press under the word Select or Save. 4. Repeat if necessary. MENU NAVIGATION - Registering the Handset Up to 4 additional A1600E handsets can be registered to the base. 1. Before registering an additional handset to the base, you should press and hold the page key , which is located on the main base, for about 5 seconds and then release it. 2. Press under the word Menu on the screen of the handset you are registering to display the main menu list. 3. Press up or down to scroll to Registration and then press under the word Select. 4. Press up or down to scroll through the base list and select one of the bases and then press under the word Select. The handset will search for the requested base. 5. If the base is found, and the handset is successfully registered, you will be prompted to enter the PIN code (the default PIN is 0000). Upon validation of the PIN, the Registration tone will sound and the base assigns a number to the handset. If the PIN entered is invalid, a warning tone will sound and the handset will return to the previous registration state. 6. If the base is not found, the handset will behave according to the Out of Range description found on page 12. BASIC PHONE FUNCTIONS - Turning the Handset “Power On/Off” Mode The A1600E handset can be turned to “Power Off” mode, which can be a convenient way to prevent the phone from ringing without having to change the ringer setting. When you turn the handset to “Power Off” mode, calls can’t be made or received until you turn the power back “On”. In Standby Mode (not during a live call): 1. To turn the handset “Off”, simply press and hold until the display turns off. 2. To turn the handset “On”, you can either: 3. Place the handset back into the base and the handset will automatically power on. 4. Press and hold until the display turns on. - Delete/Terminate Handset This function allows you to delete a handset that is registered to the base. To delete/terminate a handset: 1. Press under the word Menu on the screen to display the main menu list. 2. Press up or down to scroll to BS Settings and then press under the word Select. 3. Press under the word Select to select Delete HS. The display will show PIN? 4. Enter the PIN (the default PIN is 0000) and then press under the word Select. If the PIN is validated, you will see a list of registered handsets. 5. Press up or down to scroll to the desired handset that you would like to delete and press under the word Select. The selected handset will no longer be registered to the base. Note: If you selected the current handset or a non-registered handset, a warning tone will be heard. BASIC PHONE FUNCTIONS - Handset Name This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name: 1. Press under the word Menu on the screen to display the main menu list. 2. Press up or down to scroll to HS Settings and then press under the word Select. 3. Press up or down to scroll to Rename HS and then press under the word Select. 4. Enter the handset name (up to 9 characters) by using the keypad and then press under the word Save to confirm and exit. The handset name will be displayed above your handset number in standby mode. Note: If you make a mistake while entering the name, pr...