Оценок - 3, средний балл: 4
(
)
)
|
Фрагмент инструкции
POWER ADAPTER (supplied or optionally available) Use only 4.5 V / 300 mA adapter (positive pole to the center pin). Consult your local dealer on the type of adapter required. 1 Make sure the local voltage corresponds to the power adapter’s voltage. 2 Connect the power adapter to the 4.5V DC jack of the player and to the wall power outlet. Note: Always disconnect the adapter when you are not using it. HEADPHONES AY 3640 • Connect the supplied headphones to the p/LINE OUT jack. Note: p/LINE OUT can also be used for connecting the player to your HiFi system (signal lead) or your car radio (cassette adapter or signal lead). In both cases, the volume of the player must be set to position 8. Use your head when using headphones Hearing safety: Do not play your headphones at a high volume. Hearing experts advise that continuous use at high volume can permanently damage your hearing. Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you. 4,5VDC PLAYBACK INFORMATION • If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded properly, dISC is displayed. In that case, use FINALIZE on your CD-recorder to complete the recording. • If you want to play a CD-Rewritable (CD-RW), it takes 3–15 seconds for sound reproduction to start once you have pressed 2;. • Playback will stop if you open the CD lid. • While the CD is being read, -- flashes in the display. VOLUME AND BASS Volume adjustment Adjust the volume by using VOL E. Bass adjustment • Press BASS to switch the bass enhancement on or off y is shown if the bass enhancement is activated. PROGRAM MODE PROGRAMMING TRACK NUMBERS You can select up to 20 tracks to play in a program. A single track may be played more than once in the program. 1 Press PROGRAM to store the track. yPROGRAM flash; press . or § to select desired track. When desired track is displayed, press PROGRAM button to confirm. Then, track number display change to 00. 2 Select and store all desired tracks in this way. 3 Press 2; to start playback of your selected tracks. yPROGRAM is shown and playback starts. Note: – If you try to store more than 20 tracks, the display will show program number 01 again. Clearing the program • While playback, press 9 to clear program. Notes: – The program also will be cleared if you – interrupt the power supply, or – open the CD compartment lid, or – if the unit switches off automatically. PROGRAM PROGRAM MODE PROGRAM MODE It is possible to play tracks in random order, to repeat a track or the entire CD, and to play the first few seconds of each track. 1 Press MODE during playback as often as necessary until the display shows either: yREPEAT: The current track is played repeatedly. yREPEAT ALL: The entire CD is played repeatedly. ySCAN: The first 10 seconds of each of the remaining tracks are played in sequence. ySHUFFLE: All tracks of the CD are played in random order until all of them have been played once. 2 For ‘REPEAT’ and ‘REPEAT ALL’, playback starts in the chosen mode after 2 seconds. • To return to normal playback, press MODE repeatedly until the display is clear. 3 For ‘SCAN’ and ‘SHUFFLE’, playback starts in the chosen mode after . or § is being pressed. REPEAT ALL SHUFFLE MODE PROGRAM NOTES S M A RT. V E R Y S M A RT. User guide PORTABLE CD PLAYER Read this manual first! If you have any problems, do not attempt to return this product to the store. For fast help, call us first! 1-800-531-0039 SEE WHY INSIDE IMPORTANT! Return your Warranty Registration Card within 10 days MPC210BL MPC210GR MPC210SL English CONTROLS (see illustration in first column) 1 MODE .................selects the different playing possibilities: SHUFFLE, REPEAT, REPEAT ALL and SCAN 2 BASS...................switches the bass enhancement on and off. 3 2;......................switches the player on, starts or pauses CD play 4 9.........................stops CD play, clears a program or switches the player off 5 ............................display 6 ........................skips and searches backward 7 §.......................skips and searches forward 8 OPEN 2 ..............opens the CD compartment lid 9 VOL E............adjusts the volume 0 p/LINE OUT........3.5 mm headphone jack, jack to connect the player to the audio input of an additional appliance ! OFF......................HOLD off HOLD...................locks all buttons @ PROGRAM ..........programs tracks # 4.5V DC...............jack for external power supply $ ............................typeplate % ............................battery compartment BATTERIES (supplied or optionally available) With this player you can use either: • normal batteries type LR6, UM3 or AA, • alkaline batteries type LR6, UM3 or AA. Notes:– Old and new or different types of batteries should not be combined. – Remove bat...
Эта инструкция также подходит к моделям:Плееры - MPC210SL (791.23 kb)
Плееры - MPC210GR (791.23 kb)