Оценок - 2, средний балл: 5
(
)
)
|
Фрагмент инструкции
After dialing the telephone number, press and release the * button on the telephone. This allows access to phone services that require a tone, such as banking and long-distance services. After you hang up the handset, the telephone automatically returns to pulse service. Volume Control This feature allows you to increase the listening volume in the receiver of the handset when speaking with your party. When needed, press the VOLUME up and down buttons. Redial If the number you dialed is busy, or you want to call the last number dialed again, press REDIAL. The number shows on the display and dials automatically. REDIAL button VOLUME buttons 23 One -Touch Redial If the last call you dialed was busy, you can redial it immediately by just pressing the REDIAL button without hanging up the handset. NOTE: The Redial feature stores in memory all the numbers you press. If you press any numbers after dialing the phone number you last called (for example, when accessing a voice mail system), those numbers are also dialed when using Redial. This may cause the phone to try to dial all the numbers at once. Hold 1. To place a call on hold, press the HOLD button and hang up the handset. (If you were in speakerphone mode, the unit automatically puts the call on hold.) The HOLD indicator blinks until you resume your conversation. 2. To resume your conversation, lift the handset or that of any extension phone on the same line or press the SPEAKER button. REDIAL button HOLD button SPEAKER button and indicator 24 Flash This feature is used to activate customer calling services available through your local phone company, such as Call Waiting. These services generally require an extra monthly fee. If you subscribe to any of these services, please refer to the phone company's instructions on how to use FLASH. See the "Caller ID Features" section for more information on Caller ID with Call Waiting. 1. While having a conversation, another party calls and you hear a tone. 2. Press the FLASH button once and release. The first conversation is placed on hold and the second call can be answered. 3. Press FLASH again and release. The first caller can be spoken to again and the second call is placed on hold. FLASH button 25 Memory Before you store any telephone number into memory, make sure the dial mode is correct for the type of telephone you're using. The default dial mode is tone (touch-tone), so if you have pulse (rotary) service, you must first change the dial mode. See "To Set the Dial Mode." The following buttons can be stored into any memory location: 0-9, *, # and PAUSE (REDIAL). See "Storing a Pause in Memory" and "Temporary Tone Dialing". Storing Quick Dial Numbers 1. Pick up the handset or press the SPEAKER button. 2. Press STORE. 3. Enter the telephone number (up to 20 digits). If you make a mistake, hang up and repeat the procedure for storing from the beginning. NOTE: It will not actually call the number in this mode. Quick Dial buttons STORE button 4. Press STORE. 5. Press selected Quick Dial location A or B. 6. Hang up the handset or press SPEAKER again. 7. Write the name or number of party stored in the memory location on the directory card. 26 Storing Frequently Called Numbers 1. Pick up the handset or press the SPEAKER button. 2. Press STORE. 3. Enter the telephone number (it will not actually call the number in this mode). If you make a mistake, hang up and repeat the procedure for storing from the beginning. 4. Press STORE. 5. Press 0-9 for the memory location. 6. Hang up the handset or press SPEAKER again. 7. Write the name or number of party stored in the memory location on the directory card. Reviewing Numbers Stored in Memory Quick Dial Numbers 1. Make sure the handset is hung up. 2. Press Quick Dial A or B. The number shows on the display. Quick Dial buttons button STORE button 27 Frequently Called Numbers 1. Make sure the handset is hung up. 2. Press DIAL. 3. Press 0-9 for the memory location. The number shows on the display. Changing a Stored Number Repeat the storage sequence. The new number replaces the old number at the memory location. Erasing a Stored Number 1. Pick up the handset or press SPEAKER. 2. Press STORE. 3. Press STORE again. 4. Press the location (A, B, 0-9) to be erased. Storing a Pause in Memory The REDIAL button becomes a pause function when the STORE button has been pressed first. It is valid only when storing a number into memory locations. Use the PAUSE (REDIAL) button to insert a pause when a delay is needed in an automatic dialing sequence. For example, when you must dial a 9 to get an outside line or when you enter codes to access you long distance company. STORE button 28 You may need to adjust the length of the pause duration. It can be adjusted from 1 to 9 seconds. The default setting is 4 seconds. 1. Pick up the handset or press SPEAKER. 2. Press the STORE button. 3. Press 1-9 (1=1 second, 2=2 seconds, et...
Эта инструкция также подходит к моделям:Проводные телефоны - 29391 (899.89 kb)
Проводные телефоны - 29391 (899.89 kb)
Проводные телефоны - 29391 (899.89 kb)