Оценок - 2, средний балл: 3.5
(
)
)
|
Фрагмент инструкции
S • dtmf 0-9: Set ring as ordinary rings in di • not disturb: Sets the phone do no • pcmring: Sets the ring to music. forward • user define: Sets to music saved by user by selection this number Forward calls if power off by checking this box. Pleas forwarded calls phone number into forward number field. Forward calls without replying by checking this box. Please enter receiving forwarded calls phone num period in the answer field. Forward all calls. Plea forward number field. Forward calls if busy. Please enter receiving forwarded calls phone num 6.4 Audio Settings: o Paralues Audi meter Va Fields Description Set audio type of the phone by selecting item from drop down list options are g.711u, g.711a, g.723.1, g.729, g.729a, g.729b and auto. Sets audio frames in RTP package. With G.723 audio codec used, set it as 1; with G729 audio codec used, set it as 2. The recommendation value is 2. With g.723.1 selected in audio type drop down list, e high rate (6.3K) by checking/unchecking this option. Enab box. Enab box. Enab aec box. handset in Set the volume of handset input. The range is 1 to 15. handset out Set the volume of handset output. The range is 1 6.5 Other Settings: r Parames Othe eter Valu Field Description password Set the user’s password. Should be no longer than 16 digits. super pa Set the administrator’s password. Shou sntp ip Fill IP address of the time server here. use daylig Enable/Disable daylight by checking/unchecki 6.6 Update After configuration, please click Save/Reboot. IPF-2002L will save the 6.7 Phone Book You may create a phone book entry by input the necessary information in their corresponding spaces. For example, if you want to add a new contact artdio with phone number 88635295000 to your No. 1 phone b Phone Number field. After configure the phone book . With H.323 protocol used without using the gatekeeper or voice gateway, you can enter the IP address of another IPF-2002L in the phone number field (use “*” instead of “.”). For example, enter 192*168*1*21 for IP address 192.168.1.21. 7. Passing through the NAT/Firewall: When IPF-2002L works with NAT/Firewall, some of the following cases might happen: 1. With a valid account, IPF-2002L can not successfully register to the server. 2. IPF-2002L itself can make calls but is not able to receive calls. 3. One-way talk. One end can not hear any sound. It might be the NAT/Firewall issues in these cases. IPF-2002L supports two methods to allow SIP passing through the NAT/Firewall by deploying STUN or Outbound Proxy. 7.1 SIP with STUN • service address: fill up the IP address or domain name of the SIP Proxy server. • nat traversal: select STUN from the drop down list. • nat addr: fill up the IP address and domain name of the STUN server. 7.2 SIP with Outbound Proxy • service address: fill up the IP address or domain name of the Outbound Proxy server. If the port of the Outbound Proxy is not 5060, please add “:” and the port number right after the IP address. • service id: fill up the IP address or domain name of the SIP Proxy server. • nat traversal: select disable. 7.3 Others When H.323 and MGCP protocol used, please refer to the appendix H.323 and MGCP configuration examples. If IPF-2002L can not work this way, open the corresponding ports on the NAT/Firewall device. Figure below shows the possible usage ports for the IPF-2002L. Please contact to the network administrator or MIS person to open these ports on the NAT/Firewall device: • register port: for TCP/UDP protocol • signal port: for TCP/UDP protocol • control port: for TCP/UDP protocol • rtp port: for UDP protocol 8. Registration Message Once the account is successfully registered on the IPF-2002L,.Ready for call.will shows on the screen, so does the time and date. If the registration is not successful, the LCD will display .Logon Fail.or.Wait Logon ….. The possible reasons of the registration failure would be: • Internet connection is fail. (Fail to acquire the IP address under the DHCP and PPPoE mode, or some IP configurations are wrong under the Static IP mode), • Registration is fail. (Fail to register to the VoIP server) 9. Using IPF-2002L 9.1 Pickup the Phone When there is an incoming phone call, the IPF-2002L will ring. There are three ways you can pick up the call: • Use handset: When the phone rings, pick up the handset to talk to the other end. When the call is end, hand up the handset. • From handset to speaker: If you are using the handset, press ENTER to transfer the call to speaker. Press Enter again to hand up the call. • Use earphone: Have your earphone plug into the earphone jack. When the phone rings, pick up the handset and place it aside the phone, then you can use the earphone to pick the phone. • Use speaker: When the phone rings, press ENTER button to pick up the call. Press Enter again to hand up the call. • From speaker to handset: If you are using the speaker, pick up the handset then you are able to pick up the call. Press Enter again to hand up the call. 9....