Оценок - 0, средний балл: 0
(
)
)
|
К этому устройству также есть другие инструкции:
Фрагмент инструкции
Green (flashing) The projector has been turned off due to excessive heat (60 seconds). Off Power off. Orange This is the warning message of excessive heat when the projector is on. Turn the projector off and check the ventilator. Red (flashing) Power has turned off due to problem with the internal cooling fan. Contact your service center. Lamp Indicator Red Projector lamp is reaching the end of its life and needs to be replaced with a new lamp. Red (flashing) An error has occurred in the projector lamp. Turn the projector on again after sufficient amount of time. If this indicator flashes red again, contact your local service center. Green (flashing) The lamp cover and filter cover is opened. Deco LED (Lens Shift Dial) Blue (flashing) Lamp is starting up. 11 Names of parts Accessories Remote Control AAA Battery Owner’s manual CD Owner’s manual Power Cord Polishing Cloth Filter Optional Extras * Contact your dealer to purchase these items. * The lamp is consumable and needs to be replaced with a new one when it is burned out. Contact your dealer or service center for a replacement lamp. * Optional parts can be changed without notice to improve the quality of the product, and new optional parts can be added. Projection Screen Lamp SCART to RCA jack S-Video Cable HDMI Cable Component Cable Computer Cable Video Cable Ceiling mount for projector 12 Installing and Composition Installing and Composition Installation Precautions Provide proper ventilation for this projector. • The projector is equipped with ventilation holes(intake) on the bottom and ventilation holes(exhaust) on the front. Do not block or place anything near these holes. Internal heat build-up may occur, causing picture degradation or damage to the projector. • Do not place the projector on a carpet, rug or other similar surface. It may prevent a adequate ventilation of the projector bottom. This product should be mounted to a wall or ceiling only. • Never push projector or spill any kind of liquid into the projector. • Leave an adequate distance (30 cm or more) around the projector. Place this projector in adequate temperature and humidity conditions. • Install this projector only in a location where adequate temperature and humidity is available. (Refer to page 35) Don’t place the projector where it can be covered with dust. • This may cause overheating of the projector. Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire hazard. This projector is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue or green) that continuously appear on the projector Screen. This is a normal result of the manufacturing process and does not indicate a malfunction. To display DTV programs, it is necessary to purchase a DTV receiver (Set-top Box) and connect it to the projector. The remote control may not work when a lamp equipped with electronic ballast or a three-wavelength lamp is installed. Replace those lamps with international standard products to use the remote control normally. 13 Installing and Composition Positioning the Projector 1. Place the projector on a sturdy and horizontal surface. 2. Place the projector the desired distance from the screen. The distance between the projector and the screen determines the actual size of the image. 3. Position the projector so that the lens is set at a right angle to the screen. If the projector is not set at a right angle, the screen image will be crooked. Although, slight angles can be counteracted using the Keystone adjustement. (Refer to page 25.). 4. Connect the power cable to the projector and the wall outlet after placing the projector in its desired location. projection distance based on the picture format Lens shift : Max X/2 Screen Screen height (X) Lens shift : 0 X/2 Projection off-set ratio:120% (Lens shift : Max) Projection distance (D) Y/2 Screen Screen Width (Y) Y/2 Projection distance (D) 3076266437487716054010168864981181215250127011076231484269960152413287471788324670177815508722092379480203217719962395434190228619921121269948881002540221412453003543512030482657149436106530140355630991743421876241604064354219924825871918045723985224154339813200508044282491604010907220558848702740664812002240609653132989725513096260660457563238786314191280711261993487847015285300762066413736907816380 16 : 9 Scale Screen Projection Distance Diagonal Size (inch) Diagonal Size (mm) Horizontal Size (mm) Vertical Size (mm) Shortest Distance (mm) Longest Distance (mm) * The projector distancd can be adjusted using the Zoom function. * You can move an image up to 70% of the screen size from the lens center. 14 Installing and Composition Kensington Security System • This projector has a Kensington Security System Connector on the side panel. Connect the Kensington Security System cable as below. • For the detailed installation and use of the Kensington Security System, refer to the user’s guide included with th...