Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
In this case, disconnect the USB cable, restart the computer, then connect the computer to the projector using the USB cable. • This projector is not guaranteed for suspend, standby mode. When you use the projector in suspend, standby mode, disconnect the projector from the USB port on the computer. • Operations are not guaranteed for all the recommended computer environments. Connecting with a VCR/15k RGB/ Component Equipment This section describes how to connect the projector with a VCR, external active speakers, and 15k RGB/ component equipment. Also refer to the instruction manuals of the equipment to be connected. When making connections, be sure to: • turn off all equipment before making any connections. • use the proper cables for each connection. • insert the plugs of the cables properly; plugs that are not fully inserted often generate noise. When pulling out a cable, be sure to pull it out from the plug, not the cable itself. S-Video cable (not supplied) Audio/video cable (not supplied) Active speakers to audio/video outputs to S video output VCR Right side RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VD G/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC RS-232C IN PLUG IN POWER OUTPUT INPUT A INPUT B VIDEO INCONTROL SREMOTE DIGITAL RGB USB R/R-Y/PR B/B-Y/PB SYNC/HD VDG/Y MOUSEAUDIORGB MOUSEAUDIOAUDIO RGBMONITOR S VIDEO VIDEO AUDIO L R (MONO) DIGITAL RGB RGB 5BNC DIGITAL RGB RGB 5BNC Right side 15k RGB/Component equipment to RGB/ component output BNC Cable (not supplied) Stereo audio connecting cable (not supplied) to audio output Notes • Set the aspect ratio using ASPECT in the INPUT SETTING menu according to the input signal. • To connect a 15k RGB/Component equipment, select the COMPUTER/COMPONENT/DTV YPBPR/DTV GBR in the INPUT-A in the SET SETTING menu according to the input signal. • Use the composite sync signal when you input the external sync signal from 15k RGB/component equipment. Connecting to a HDTV 1035/60i Since the screen ratio of a high definition image is 16:9 and 576 lines are displayed in the vertical direction, the image displayed is not a high- definition image. 18 (GB) Projecting Selecting the Menu Language You can select the language for displaying in the menu and other on screen displays. The factory setting is ENGLISH. INPUT HELPMENU ENTER RESET APA LIGHT VOL + VOL - LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY 24, 5, 6 3 1 1 Plug the AC power cord into the wall outlet. 2 Press the I / 1 key to turn on the power. 3 Press the MENU key. The menu display appears. 4 Select the icon of SET SETTING Menu, the third one, with the M or m key, then press the , or ENTER key. The SET SETTING Menu appears. INPUT-A SET SETTING STATUS: ON INPUT-A: COMPUTER AUTO INPUT SEL: OFF LANGUAGE: ENGLISH SPEAKER: ON POWER SAVING: OFF SIRCS RECEIVER: FRONT&REAR 5 Select LANGUAGE with the M or m key, then press the , or ENTER key. 6 Select the language desired with the M or m key, then press the < or ENTER key. The menu changes into the selected language . To clear the menu display Press the MENU key. The menu display disappears automatically if no key is pressed for one minute. Projecting INPUT HELPMENU ENTER RESET APA LIGHT VOL + VOL - LAMP/ COVER TEMP/ FAN POWER SAVING ON/ STANDBY 2 3 1 4 5 MUTING PIC AUDIO LENS APA LASER INPUT D KEYSTONE HELP PJ NETWORK ON COMMAND OFF VOLUME ENTER FUNCTION RM-PJM15 D ZOOM CLICK RESET/ ESCAPE MENU/ TAB R 1 2 3 FREEZE 2 3 Rear remote control detector ON/STANDBY indicator (Front) APA key APA key 1 After all equipment is connected completely, plug the AC power cord into the wall outlet. The ON/STANDBY indicator lights in red and the projector goes into the standby mode. 2 Press the I / 1 key. The ON/STANDBY indicator lights in green. 3 Turn on equipment connected to the projector. Press the INPUT key to select the input source. INPUT-A: Selects audio and video signals input from the INPUT A connector. 19 (GB) Projecting INPUT-B: Selects audio and video signals input from the INPUT B connector. VIDEO: Selects audio and video signals input from the AUDIO/VIDEO (VIDEO IN) jacks. S-VIDEO: Selects audio and video signals input from the AUDIO/S VIDEO (VIDEO IN) jacks. Note The AUDIO (VIDEO IN) jacks are used as audio outputs of both VIDEO and S-VIDEO. 4 Turn the zoom ring to adjust the size of the picture. 5 Turn the focus ring to adjust the focus. Note Looking into the lens when projecting may cause injury to your eyes. To Press Adjust the volume the VOL +/–keys on the control panel or the VOLUME +/–keys on the Remoter Commander. Cut off the sound the AUDIO MUTING key on the Remote Commander. To restore the sound, press the AUDIO MUTING key again or press the VOL + key on the control panel or the VOLUME + key on the Remote Commander. Cut off the picture the PIC MUTING key on the Remote Commander. To restore the picture, press the PIC MUTING key again. To ge...