Оценок - 0, средний балл: 0
(
)
)
|
Фрагмент инструкции
The ON/STANDBY indicator flashes in green and the fan continues to run for about 90 seconds to reduce the internal heat. Also, the ON/STANDBY indicator flashes quickly for the first 60 seconds. During this time, you will not be able to light up the ON/STANDBY indicator with the I / 1 key. 3 Unplug the AC power cord from the wall outlet after the fan stops running and the ON/STANDBY indicator lights in red. When you cannot confirm the on-screen message When you cannot confirm the on-screen message in a certain condition, you can turn off the power by holding the I / 1 key for about one second. Note Do not unplug the AC power cord while the fan is still running; otherwise, the fan will stop even though the internal heat is still high, which could result in a breakdown of the projector. On air filter To maintain optimal performance, clean the air filter every 300 hours. Setting Up and Projecting 21 21 GB Projecting Effective Tools for Your Presentation To enlarge the image (Digital Zoom function) You can select a point in the image to enlarge. This function works only when a signal from a computer is input. 1 Press the D ZOOM + key on the Remote Commander. The digital zoom icon appears the center of the image. Digital zoom icon 2 Move the icon to the point on the image you want to enlarge. Use the arrow key (M/m/