Оценок - 2, средний балл: 4.5
(
)
)
|
Фото и характеристики Sony VPL-VW80 |
Фрагмент инструкции
When video signal is input: Limited (16-235) When computer signal is input: Full (0-255) When a signal other than those of HDMI standard is input, the following symptoms may occur. • When a video signal is input, the color gradation of the dark area or bright area may become unclear, or texts may become faded. In this case, switch the RGB dynamic range of the connected equipment to Limited (16-235). If this adjustment is unavailable, adjust “Brightness”, “Contrast”, or “Sharpness” in the Picture menu of the projector. (1 pages 47, 48) • When a computer signal is input, the texts may become faded. In this case, adjust the “Sharpness” in the Picture menu. (1 page 48) Turning Off the Power 1 Press the ?/1 (ON/STANDBY) switch. A message “POWER OFF?” appears on the screen. 2 Press the ?/1 (ON/STANDBY) switch again before the message disappears. The lens protector will close. Be careful not to catch your fingers or any objects. The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will not be able to light up the ON/STANDBY indicator with the ?/1 (ON/STANDBY) switch. 3 Confirm that the fan stops running and the ON/STANDBY indicator lights in red. You can turn off the projector by holding the ?/1 (ON/STANDBY) switch for about 1 second, instead of performing the above steps. Projecting 31 Operating the BRAVIA Sync Compatible Equipment with the Remote Control of the Projector BRAVIA Sync compatible equipment HDMI 1 HDMI 2 Operating the BRAVIA Sync Compatible Equipment with the Remote Control of the Projector BRAVIA Sync compatible equipment HDMI 1 HDMI 2 By using the remote control of the projector, you can directly operate the BRAVIA Sync compatible equipment connected to the HDMI 1 and HDMI 2 INPUT connectors of the projector. Only the connected equipment that is currently being viewed can be operated. To operate the BRAVIA Sync compatible equipment, the Control for HDMI setting of the projector and the connected equipment must both be set. (1 page 55) Making operations such as playback or stop Press ./m, N, >/M, X, x while viewing pictures. You can make basic operations such as playback or stop for the connected equipment currently being viewed. Buttons available to Displaying and operating the operate the BRAVIA menu of the connected Sync equipment currently being compatible viewed equipment Press SYNC MENU while viewing pictures. Operating menu of the connected equipment currently being viewed is displayed. Select the menu item to operate with M/m/