Оценок - 4, средний балл: 4.3
(
)
)
|
Фрагмент инструкции
This setting will be cleared when you turn the power off. The setting will be back to “ Standard” when the power is turned on next time. 2: White balance, if set to Fixed, is reset upon power off and the Auto is resumed the next time the unit is turned on. (Models with the document camera) Notes • Note that if Power on is set to Auto, then if the power cord is plugged in when power is restored after a power outage, the projector power will come on. • Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power. Unplugging the power cord to cut off the power will shorten the life of the lamp. 32 The display Use this menu to set Item Description Screen size (Full): Display with LCD panel’s resolution (Thru): Display with sampling resolution (for computer input) (Wide): Wide-screen display (for Video, S-video, and Y/PB/PR) Language Select one of the languages below to use for displaying menus and messages [ : Enter setting mode] [ :Selection] [Apply: ] English/Francais/Deutsch/Italiano/Espanol/ Portugues/ / / / Background Screen to display when there is no input signal (Logo) (Blue) (None) Icon Display icons as function guides On Off Start-up screen Display start-up screen when power turned on On Off Notes • If “ Thru” is selected for screen size, portions exceeding the pixel count of the LCD panel p.45 will not appear on the screen. Note that for RGB signals with clock speeds SXGA3_60 p.46 or lower, all input pixel signals are sampled. (This effect is noticeable when the screen is enlarged using the Resize function p.29 ). However, if the clock speed is higher than this, the RGB pixel signal is reduced before sampling. • Displaying the images with the aspect ratio different from the original with the purpose of other than the personal and private viewing, using the screen size menu may violate the copyright protected by the law. Reset menu (Special menu) When other menus are not displayed and the button is held down, the menu appears. • When the screen is placed vertically, and Auto keystone correction is executed, but the keystone correction is not successful, stow the foot adjuster in its original position, place the projector on a flat surface, select Horizontal reference value reset, and press the button. • Select Reset All and press the button to return all menu items to the factory settings. Item Description Horizontal reference value reset Reset the horizontal reference value for Auto keystone correction [ : Enter execution mode] [ Yes No] [Apply: ] Reset all Reset all menu items to their factory settings [ : Enter execution mode] [ Yes No] [Apply: ] 33 Operations 35 Operations 34 Preparation of the document camera (when loading the camera) PRECAUTIONS • Do not jolt or force the camera head or camera arm. Doing so could cause malfunction. • Note that when extending or rotating the camera arm, the arm moves in an arc....
Эта инструкция также подходит к моделям:Проекторы - Mobile Projectors TLP-S41U (1.72 mb)
Проекторы - Mobile Projectors TLP-S70U (1.72 mb)
Проекторы - Mobile Projectors TLP-S71U (1.72 mb)
Проекторы - Mobile Projectors TLP-T60MU (1.72 mb)