Оценок - 3, средний балл: 5
(
)
)
|
Фрагмент инструкции
• With analog RGB input, if the signal source’s dot clock frequency exceeds 140 MHz, not all of the pixel signals can be sampled. • For digital RGB inputs, the projector is not compatible with signal sources whose dot clock frequency exceeds 112 MHz. The compatible video signal The compatible component signal (Y/PB/PR) Mode fh (kHz) fv (Hz) fsc (MHz) NTSC 15.73 60 3.58 PAL 15.63 50 4.43 SECAM 15.63 50 4.25 or 4.41 PAL-M 15.73 60 3.58 PAL-N 15.63 50 3.58 PAL-60 15.73 60 4.43 NTSC4.43 15.73 60 4.43 Mode fh (kHz) fv (Hz) 480i 15.73 59.94 480p 31.47 59.94 720p 45.00 60.00 1080i 33.75 60.00 Others Controlling 93 CONTENTS You can also control entering the command Signal assignment Interface format 12 3 86 4 5 7 CONTROL RS-232C Mini DIN 8-pin Pin No. Signal Description 1 RXD Receiving data 2 CTS Consent to send 3 DSR Data set ready 4 GND Signal ground 5 RTS Request to send 6 N.C No connection 7 TXD Sending data 8 N.C No connection 1 Communication method 2 Communication format 3 Data format 4 Return value RS-232C 9600 bps, No parity, Data length: 8 bit, Stop bit: 1 bit STX (02h) Command (3Byte) ETX (03h) One command only can be used communication. Command shall be composed of alphanumeric characters of ASCII description. Use only capital letters. Acknowledge ACK (06h) Not Acknowledge NAK (15h) Command list Classification Items/Status Selection Command Adjustment Comma...
Эта инструкция также подходит к моделям:Проекторы - Conference Room Projectors TLP-X10U (3.57 mb)
Проекторы - Conference Room Projectors TLP-X11U (3.57 mb)
Проекторы - Conference Room Projectors TLP-X20U (3.57 mb)
Проекторы - TLP-X10U (3.57 mb)